Whirlpool Air Conditioner Error E1
⚡ Quick Answer: The Whirlpool air conditioner E1 error indicates a fault with the indoor ambient temperature sensor. This malfunction can lead to erratic cooling beha... ⚠️ Difficulty Varies
What Does Error E1 Mean?
The Whirlpool air conditioner E1 error indicates a fault with the indoor ambient temperature sensor. This malfunction can lead to erratic cooling behavior and unresponsive controls, preventing the unit from effectively regulating temperature. It's important to address this issue promptly to restore proper functionality.
Common Symptoms:
- Unit stops cooling when E1 is displayed
- Controls may become unresponsive alongside the error display
Possible Causes
- Indoor ambient temperature sensor failure or fault (medium)
How to Fix Error E1
DIY Fix Basic checks and power reset
- Turn off the air conditioner and disconnect power
- Wait 5–10 minutes and reconnect power to attempt a soft reset
- After reset, check if the E1 code persists
- Ensure intake filters are clean to eliminate airflow reporting misreads
Technician Only Inspect and replace indoor ambient temperature sensor
- Disconnect power to the unit
- Access the indoor unit control compartment per Whirlpool service instructions
- Test the indoor ambient temperature sensor for out‑of‑range readings or open/short circuits
- Replace the defective sensor with Whirlpool‑specified part if tests confirm failure
- Reassemble and verify normal operation
Parts needed: Indoor ambient temperature sensor
- If the error persists after power reset and filter cleaning
- If any internal component testing shows sensor faults
- If there are additional error codes or system shutdowns indicating possible deeper failures
Next step
Choose the next step for E1
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Air Conditioner parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Air Conditioner Fin Cleaner
For routine cleaning of accessible coil fins when permitted by the manufacturer. Disconnect power and follow product and appliance instructions.
Model-Compatible Washable AC Filter
A reusable filter option only where the appliance supports one. Match the full model, dimensions, and filter specification.
Compatibility check required: use the complete appliance model and compare the existing filter, bag, or specification before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | N/A |
|---|---|
| component | Temperature Sensor |
| resistance | 5-10 kOhms |
| part_number | WPW10199961 |
| voltage_rating | 120V AC |
Common Questions
What does E1 error mean on Whirlpool air conditioner?
The E1 error indicates a malfunction in the indoor ambient temperature sensor, causing cooling issues.
Can I fix Whirlpool air conditioner E1 error myself?
Yes, you can try a power reset by turning off the unit, disconnecting power for 5-10 minutes, and reconnecting.
How much does it cost to fix E1 error?
The estimated repair cost for the E1 error is $50-$150 for parts, depending on the model and region.
When should I call a technician for E1?
Call a technician if the E1 error persists after a power reset or if there are other error codes or symptoms.
Sources & References
- Whirlpool AC Error Code List and Solutions (community)
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!