Westinghouse Washing Machine Error E62
⚡ Quick Answer: The Westinghouse Washing Machine error E62 indicates a malfunction in the motor drive unit, often leading to unusual humming sounds and a failure to s... ⚠️ Difficulty Varies
What Does Error E62 Mean?
The Westinghouse Washing Machine error E62 indicates a malfunction in the motor drive unit, often leading to unusual humming sounds and a failure to spin. This error may stem from issues such as a faulty wiring connection, a malfunctioning NTC temperature sensor, a defective heating element, or problems with the main PCB control board. If the error appears during a wash cycle, it may cause the machine to pause or stop operation altogether.
Common Symptoms:
- Washer displays E62 code during a wash cycle
- Operation may pause or stop when the code is shown
Possible Causes
- Wiring fault or connection issue (low)
- Faulty NTC temperature sensor (wash cycle) (low)
- Heating element fault (low)
- Main PCB (control board) fault (low)
How to Fix Error E62
DIY Fix Basic checks and reset
- Turn off and unplug the washing machine
- Wait several minutes, then plug the machine back and power on to clear transient errors
Technician Only Inspect internal wiring and sensor components
- Open the unit’s access panel
- Visually inspect wiring harnesses for damage or disconnection
- Test NTC temperature sensor and heating element function with appropriate tools
- Check main PCB for visible damage or burnt components
Parts needed: wiring harness, NTC temperature sensor, heating element, main PCB
- If the error persists after basic reset and visual checks
- If internal component testing indicates failure
- If user is not comfortable working inside the appliance
Next step
Choose the next step for E62
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other components that may be involved
Check these only if your diagnosis points to them.
Heating Element
Heats the water or air inside the appliance to the required temperature.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Technical Specifications
| wattage | 500W |
|---|---|
| component | Motor Drive Unit |
| resistance | 5-15 ohms |
| part_number | WH49X30114 |
| voltage_rating | 120V AC |
Common Questions
What does E62 error mean on Westinghouse Washing Machine?
E62 indicates a malfunction in the motor drive unit, causing the washer to stop during a cycle.
Can I fix Westinghouse Washing Machine E62 error myself?
Yes, you can perform basic checks and resets, but internal repairs may require a technician.
How much does it cost to fix E62 error?
Repair costs typically range from $100 to $400, depending on parts and labor.
When should I call a technician for E62?
Call a technician if the error persists after a reset or if you are uncomfortable with internal repairs.
Data last verified: 2026-07-22
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!