Westinghouse Washing Machine Error E11
⚡ Quick Answer: The Westinghouse Washing Machine E11 error indicates a drainage issue, typically arising when the machine cannot fill with water during the wash cycle... ✅ DIY Fixable
What Does Error E11 Mean?
The Westinghouse Washing Machine E11 error indicates a drainage issue, typically arising when the machine cannot fill with water during the wash cycle. This may result in the cycle not starting or stopping shortly after beginning, with the display showing 'E11'. Common causes include an insufficient water supply or problems with the inlet system components, such as blocked filters or kinked hoses. Proper troubleshooting can often resolve the issue.
Common Symptoms:
- Washer fails to fill with water
- Wash cycle does not start or stops shortly after start
- Display shows E11 during water intake
Possible Causes
- Insufficient water supply or water intake issue (medium)
- Faulty or obstructed inlet system components (medium)
How to Fix Error E11
DIY Fix Check water supply and basic inlet components
- Ensure both cold and hot water taps are fully open.
- Check that inlet hoses are not kinked or blocked.
- Clean water inlet filters/screens on the hoses and machine.
- Verify water pressure is adequate for the washer (no low pressure).
DIY Fix Reset and basic troubleshooting
- Turn off and unplug the washing machine for a few minutes, then plug it back in and attempt another cycle.
- Check that the machine is level and door is properly closed before restarting.
Technician Only Test and service inlet valve and pressure switch
- Test water inlet valve for proper electrical function and water flow under pressure.
- Inspect pressure switch and tubing for blockages or leaks that could cause incorrect water level detection.
- Check wiring connections for inlet system components.
- Replace any defective parts as identified.
Parts needed: Water inlet valve, Pressure switch, Hoses/filters
- If water supply is normal but error persists after basic checks
- If internal components (valve/pressure switch) test abnormal or technician-level troubleshooting unsuccessful
Next step
Choose the next step for E11
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Water Inlet Valve
Controls the flow of hot and cold water into the appliance.
- Typical part-only price
- $25 - $60
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Pressure Switch
Detects the water level inside the tub and signals when to start or stop filling.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does E11 error mean on Westinghouse Washing Machine?
The E11 error indicates a drainage issue, primarily related to the machine's inability to fill with water.
Can I fix Westinghouse Washing Machine E11 error myself?
Yes, you can check the water supply, ensure hoses are not blocked, and reset the machine.
How much does it cost to fix E11 error?
Repair costs range from $50 to $200 for parts, depending on the region and model.
When should I call a technician for E11?
Call a technician if the error persists after checking the water supply and if internal components test abnormal.
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!