Westinghouse Washing Machine Error E50

⚡ Quick Answer: The Westinghouse Washing Machine error E50 signals a motor drive unit malfunction, typically resulting in unusual humming sounds and failure to spin. ... ✅ DIY Fixable

What Does Error E50 Mean?

The Westinghouse Washing Machine error E50 signals a motor drive unit malfunction, typically resulting in unusual humming sounds and failure to spin. This error often occurs mid-cycle or at the start, and while it may restart after a reset, it indicates potential issues with motor overload, faulty motor control circuitry, or wiring connections. Addressing these problems promptly is essential to restore normal operation.

Common Symptoms:

  • Error appears mid‑cycle or at start of cycle
  • Machine stops operation and may not complete spin
  • No obvious water fill or drain issue tied to this code
  • Machine may restart fine after reset (in some user cases)

Possible Causes

  • Motor overload or overheating (medium)
  • Faulty motor or motor control circuitry (medium)
  • Wiring or connection issue between control board and motor (medium)

How to Fix Error E50

DIY Fix Basic checks and reset

  1. Turn off the washing machine and unplug it from power
  2. Allow the machine to sit for several minutes to let any overheated components cool
  3. Reduce the size of the laundry load and remove excess clothing if overloaded
  4. Plug the machine back in and retry a cycle

Technician Only Inspect and service motor and control circuitry

  1. Disconnect power and remove rear panel to access the motor and wiring
  2. Check motor and wiring harness for damage, loose connections or burnt components
  3. Test the motor control board and relays for faults using appropriate diagnostic tools
  4. Replace failing components (motor, motor control board, wiring) as needed

Parts needed: Motor assembly, Motor control board, Wiring harness/connectors

🛑 When to Call a Pro:
  • If the error persists after load reduction and reset
  • If there are unusual noises, burning smells, or the machine fails to spin

Technical Specifications

wattage 500W
component Motor Drive Unit
resistance 5-15 ohms
part_number WH20X10020
voltage_rating 120V AC

Common Questions

What does E50 error mean on Westinghouse Washing Machine?

E50 indicates a motor drive unit malfunction, often causing unusual humming sounds and failure to spin.

Can I fix Westinghouse Washing Machine E50 error myself?

Yes, you can attempt basic checks like resetting the machine, reducing the laundry load, and ensuring proper connections.

How much does it cost to fix E50 error?

Repair costs for E50 error typically range from $150 to over $500, depending on parts and service.

When should I call a technician for E50?

Call a technician if the error persists after a reset, if there are unusual noises or smells, or if the machine fails to spin.

Sources & References

Data last verified: 2026-07-07

User Comments (0)

Share your experience or solution below.

Be the first to comment!