Westinghouse Washing Machine Error E41
⚡ Quick Answer: The Westinghouse Washing Machine error E41 indicates a malfunction in the door lock mechanism. This error typically arises when the door fails to lock... ✅ DIY Fixable
What Does Error E41 Mean?
The Westinghouse Washing Machine error E41 indicates a malfunction in the door lock mechanism. This error typically arises when the door fails to lock or unlock properly, causing the machine to stop mid-cycle. Symptoms include the washing machine pausing or not starting at all, the door lock failing to engage, and the machine displaying a door open warning even when the door is closed. Common causes include an improperly closed door or a faulty door lock or latch mechanism.
Common Symptoms:
- Washing machine stops and displays E41
- Cycle does not start or pauses early
- Door lock does not engage
- Machine indicates door open even when closed
Possible Causes
- Door not fully closed or obstruction in door seal (medium)
- Faulty door lock/latch mechanism or switch (medium)
How to Fix Error E41
DIY Fix Check and reseat the door
- Turn off the washing machine and unplug it.
- Inspect the door and door seal for clothing, debris, or obstructions.
- Firmly close the door until you hear a click indicating it has latched.
- Try a short cycle to see if the error clears.
Technician Only Inspect or replace door lock/latch assembly
- Disconnect power and water supply to the machine.
- Remove the front panel to access the door lock/latch assembly.
- Test the door switch/latch for continuity with a multimeter.
- Replace the door lock/latch assembly if faulty, and reassemble.
- Test machine operation after repair.
Parts needed: Door lock/latch assembly, Door switch
- If after checking and reseating the door the E41 code persists
- If the door lock/latch mechanism appears damaged or fails continuity testing
- If the error appears intermittent despite basic checks
Next step
Choose the next step for E41
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Door Lock Assembly
Secures the door shut during operation for safety and signals the control board to run.
- Typical part-only price
- $30 - $75
- DIY difficulty
- Easy
- Estimated time
- 10-20 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other components that may be involved
Check these only if your diagnosis points to them.
Door or Lid Switch
Detects whether the appliance door or lid is safely closed before operation.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Technical Specifications
| wattage | N/A |
|---|---|
| component | Door Lock Assembly |
| resistance | 10-20 ohms |
| part_number | WH10X10006 |
| voltage_rating | 120V AC |
Common Questions
What does E41 error mean on Westinghouse Washing Machine?
E41 error signifies a malfunction in the door lock mechanism, preventing the door from locking or unlocking properly.
Can I fix Westinghouse Washing Machine E41 error myself?
Yes, you can check and reseat the door, ensuring it closes properly without obstructions.
How much does it cost to fix E41 error?
The estimated repair cost for the E41 error ranges from 50 to 150 USD for parts, plus labor.
When should I call a technician for E41?
Call a technician if the E41 code persists after reseating the door or if the door lock mechanism is damaged.
Sources & References
Data last verified: 2026-07-22
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!