Westinghouse Washing Machine Error E35

⚡ Quick Answer: The Westinghouse Washing Machine error E35 signifies a malfunction in the door lock mechanism, often triggered by an overflow or overfill condition de... ✅ DIY Fixable

What Does Error E35 Mean?

The Westinghouse Washing Machine error E35 signifies a malfunction in the door lock mechanism, often triggered by an overflow or overfill condition detected by the pressure control system. This error is typically displayed alongside a flashing display, preventing the wash cycle from starting. Users may notice excess water in the drum or that the machine continually drains or pauses during cycles. Addressing this issue promptly is crucial to avoid further complications.

Common Symptoms:

  • Machine displays E35 on display panel when trying to run or during cycle
  • Excess water detected in drum or overflow safety drain cycling
  • Cycle interrupts and machine may drain continually or pause

Possible Causes

  • Overflow detected due to water fill valve or pressure control issue (medium)
  • Pressure switch or pressure hose malfunction (medium)
  • Incorrect detergent use causing excess foam that misleads level detection (low)

How to Fix Error E35

DIY Fix Initial inspection and reset

  1. Stop the machine, turn off water supply, and unplug the washer to prevent further overflow.
  2. Check that the drain hose is not kinked, obstructed, or improperly positioned.
  3. Confirm water inlet faucets are fully open and water pressure is normal.
  4. Reconnect power and run a short cycle to see if the error persists.

Technician Only Check and replace pressure control components

  1. Test the pressure switch and associated pressure hose for blockages or leaks; replace if defective.
  2. Inspect the water inlet valve for proper shut‑off operation; replace valve if stuck open.
  3. Check wiring connections between pressure switch, inlet valve, and control board for continuity and damage.
  4. If needed, test and replace the main control board if it incorrectly drives the fill circuit.

Parts needed: Pressure switch, Pressure hose/tubing, Water inlet valve assembly, Control board (if electrical fault confirmed)

🛑 When to Call a Pro:
  • Water visibly leaking from machine base
  • Continuous refill/flooding beyond normal fill point
  • Pressure system or electrical parts diagnosis beyond user capability

Technical Specifications

wattage 10W
component Door Lock Assembly
resistance 10-20 ohms
part_number WH10X10006
voltage_rating 120V AC

Common Questions

What does E35 error mean on Westinghouse Washing Machine?

E35 indicates a door lock mechanism malfunction due to an overflow condition detected by the pressure system.

Can I fix Westinghouse Washing Machine E35 error myself?

Yes, you can inspect and reset the machine, check for kinks in the drain hose, and ensure water inlet faucets are open.

How much does it cost to fix E35 error?

Repair costs typically range from $80 to $300+, depending on the parts replaced and labor.

When should I call a technician for E35?

Call a technician if there's visible leaking from the machine base or if flooding occurs beyond normal fill levels.

Sources & References

Data last verified: 2026-07-07

User Comments (0)

Share your experience or solution below.

Be the first to comment!