Westinghouse Washing Machine Error E30

⚡ Quick Answer: The Westinghouse Washing Machine error E30 indicates a drainage failure, often triggered by the flood protection system. This occurs when excess water... ✅ DIY Fixable

What Does Error E30 Mean?

The Westinghouse Washing Machine error E30 indicates a drainage failure, often triggered by the flood protection system. This occurs when excess water is detected, causing the machine to stop mid-cycle and display a full tub warning. You may also notice unusual sounds during the spin cycle, or the machine may enter safety drain mode. Common causes include leaks activating the flood sensor or issues with the pressure sensor, leading to overflow conditions.

Common Symptoms:

  • Washer stops mid-cycle and displays E30
  • Water detected in base tray or excessive water in drum
  • Machine may go into safety drain mode

Possible Causes

  • Leak or water accumulation activating flood sensor (medium)
  • Overflow due to overfill or pressure sensor issue (medium)

How to Fix Error E30

DIY Fix Check for leaks and drain excess water

  1. Turn off and unplug the washing machine.
  2. Inspect around the base and underneath for any water accumulation.
  3. Tilt the machine backwards slightly with towels under front to let water in base tray drain out.
  4. Ensure hoses (inlet and drain) are properly connected and not leaking.

Technician Only Inspect flood sensor and water level controls

  1. Verify proper operation of the flood sensor/float switch and replace if faulty.
  2. Test water inlet valve and pressure switch for correct water level signalling.
  3. Inspect drain pump and hoses for blockages or damage.
  4. Check wiring/connectors related to water detection and control board signals.

Parts needed: Flood sensor / float switch, Pressure sensor, Drain pump, Water inlet valve, Wiring harness

🛑 When to Call a Pro:
  • If error persists after drying and basic checks
  • If there is visible internal leak or component failure suspected
  • If user is uncomfortable performing inspections

Technical Specifications

wattage 60W
component Drain Pump
resistance 10-30 ohms
part_number WH23X10030
voltage_rating 120V AC

Common Questions

What does E30 error mean on Westinghouse Washing Machine?

E30 indicates a drainage failure caused by excess water, triggering the flood protection system.

Can I fix Westinghouse Washing Machine E30 error myself?

Yes, you can check for leaks and drain excess water by inspecting the base and tilting the machine to let water out.

How much does it cost to fix E30 error?

Repair costs for the E30 error typically range from $50 to $200, depending on the parts required.

When should I call a technician for E30?

Contact a technician if the error persists after basic checks, or if you suspect a leak or component failure.

Data last verified: 2026-07-07

User Comments (0)

Share your experience or solution below.

Be the first to comment!