Westinghouse Washing Machine Error E24

⚡ Quick Answer: The Westinghouse Washing Machine E24 error indicates a drainage problem, typically caused by a faulty drain pump control (TRIAC), a malfunctioning dra... ✅ DIY Fixable

What Does Error E24 Mean?

The Westinghouse Washing Machine E24 error indicates a drainage problem, typically caused by a faulty drain pump control (TRIAC), a malfunctioning drain pump, or a clogged drain filter or hose. Symptoms include the washer stopping mid-cycle, an error displayed during draining, and the door being locked while the cycle pauses. Addressing the drainage path can often resolve this issue, but further inspection may be necessary for pump or control board faults.

Common Symptoms:

  • Washer stops mid‑cycle and does not drain water
  • Error displayed when attempting to drain or at end of cycle
  • Cycle pauses with door locked

Possible Causes

  • Drain pump control (TRIAC) fault or drain pump failure (medium)
  • Wiring fault affecting drain pump circuit (medium)
  • Clogged drain filter/hose preventing drainage (medium)

How to Fix Error E24

DIY Fix Check and clear drain path

  1. Turn off and unplug the washing machine.
  2. Locate the drain filter and remove it.
  3. Clean the drain filter of lint, debris, or foreign objects.
  4. Inspect the drain hose for kinks or blockages and straighten/clear as needed.
  5. Restore power and run a test drain cycle to see if E24 clears.

Technician Only Inspect/replace drain pump or related electronics

  1. Disconnect power and water supply before servicing.
  2. Remove access panel to reach drain pump assembly.
  3. Test the drain pump motor for proper operation and electrical continuity.
  4. Inspect wiring harnesses and drain pump TRIAC control circuitry on the PCB for damage.
  5. Replace the drain pump (or related control components) if faulty according to diagnostics.

Parts needed: Drain pump assembly, Wiring harness, Control board (if TRIAC or pump drive circuit failure is confirmed)

🛑 When to Call a Pro:
  • If water remains in the drum after drain path cleaning and user‑level steps, or if the drain pump hums but does not evacuate water.
  • If electrical diagnostics indicate pump or control board faults.
  • If you are uncomfortable performing internal checks (technician intervention recommended).

Technical Specifications

wattage 60W
component Drain Pump
resistance 10-20 ohms
part_number WH23X10030
voltage_rating 120V AC

Common Questions

What does E24 error mean on Westinghouse Washing Machine?

E24 indicates a drainage issue, often due to a faulty drain pump, control board, or clogged filter.

Can I fix Westinghouse Washing Machine E24 error myself?

Yes, you can check and clear the drain path by cleaning the drain filter and ensuring no blockages are present.

How much does it cost to fix E24 error?

Repair costs range from USD 80–250 for a drain pump or 150–400+ for a control board replacement.

When should I call a technician for E24?

Call a technician if water remains after cleaning the drain path or if the pump hums but doesn't drain.

Data last verified: 2026-03-09

User Comments (0)

Share your experience or solution below.

Be the first to comment!