Westinghouse Washing Machine Error E23
⚡ Quick Answer: The Westinghouse Washing Machine error E23 indicates a drainage issue, commonly linked to the drain pump. This error can cause the washing machine to ... ✅ DIY Fixable
What Does Error E23 Mean?
The Westinghouse Washing Machine error E23 indicates a drainage issue, commonly linked to the drain pump. This error can cause the washing machine to halt mid-cycle and display an error message. To troubleshoot, check that all hoses are securely connected and not kinked, and ensure the door is fully closed. If these steps do not resolve the issue, professional diagnosis and repair may be necessary.
Common Symptoms:
- No verified symptom data specific to Westinghouse E23 due to lack of authoritative sources.
Possible Causes
- Drain Pump
- Blocked Drain Hose
- Faulty Control Board
How to Fix Error E23
DIY Fix Check General Washing Machine Conditions
- Turn off and unplug the washer before inspecting.
- Confirm all hoses (water inlet, drain) are connected securely and not kinked.
- Ensure the washer’s door/lid is fully closed and latched.
- Check for visible water leaks around the base.
- Clear and clean any accessible filters (drain pump filter).
Technician Only Professional Diagnostic and Repair
- Retrieve official service manual for the specific Westinghouse model to find the E23 code definition.
- Connect professional diagnostic tool to read error history and subsystem data.
- Inspect water inlet valve, pressure/water level sensors, drain pump and board connections.
- Test components individually for continuity and correct function.
Parts needed: Water inlet valve, Pressure/water level sensor, Drain pump assembly, Control board (if needed)
- If the washer displays the E23 code and continues to fail operation after basic checks.
- Any signs of active water leakage, burning smells, unusual noises, or electrical issues.
- If you are unable to access model‑specific error definitions from the official Westinghouse documentation.
Next step
Choose the next step for E23
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Water Inlet Valve
Controls the flow of hot and cold water into the appliance.
- Typical part-only price
- $25 - $60
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other components that may be involved
Check these only if your diagnosis points to them.
Pressure Switch
Detects the water level inside the tub and signals when to start or stop filling.
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Technical Specifications
| wattage | 50W |
|---|---|
| component | Drain Pump |
| resistance | 10-20 ohms |
| part_number | WH23X10030 |
| voltage_rating | 120V AC |
Common Questions
What does E23 error mean on Westinghouse Washing Machine?
E23 indicates a drainage issue, often related to the drain pump, causing the machine to stop mid-cycle.
Can I fix Westinghouse Washing Machine E23 error myself?
Yes, check the hoses for secure connections and ensure the door is closed. Unplug the washer before inspection.
How much does it cost to fix E23 error?
Repair costs vary based on the fault and region; it typically includes a diagnostic fee plus parts and labor.
When should I call a technician for E23?
Call a technician if E23 persists after basic checks, or if you notice water leakage, unusual noises, or electrical issues.
Sources & References
Data last verified: 2026-07-22
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!