Westinghouse Washing Machine Error E22
⚡ Quick Answer: The Westinghouse Washing Machine error E22 indicates a water fill problem, often stemming from a drain pump failure. Symptoms include the cycle pausin... ✅ DIY Fixable
What Does Error E22 Mean?
The Westinghouse Washing Machine error E22 indicates a water fill problem, often stemming from a drain pump failure. Symptoms include the cycle pausing with the door locked and the machine failing to progress past the initial fill phase due to inadequate water levels. Common causes are low or restricted water supply, malfunctioning water inlet valve, or faulty pressure switch. Regularly check hoses and connections to ensure proper water flow.
Common Symptoms:
- Cycle pauses with door locked during wash when the machine cannot fill with water in expected time.
- Machine does not progress past initial fill phase or stops mid-cycle due to inadequate water level.
Possible Causes
- Low or restricted water supply (pressure too low, inlet hoses kinked or blocked). (medium)
- Water fill solenoid valve malfunction (inlet valve not providing correct water flow). (medium)
- Pressure switch or sensor related to water level detection faulty or leaking. (medium)
How to Fix Error E22
DIY Fix Check basic water supply and hoses
- Ensure hot and cold water supply valves to the washer are fully open.
- Inspect inlet hoses for kinks, bends, or blockages and straighten/replace if found.
- Check that inlet hose connections at the machine and wall are secure.
DIY Fix Clean inlet valve screens
- Turn off water supply to the washer.
- Disconnect inlet hoses from the back of the machine.
- Locate and clean small mesh screens on the water inlet ports of the washer.
- Reconnect hoses and restore water supply.
Technician Only Test or replace water inlet valve and pressure switch
- Verify incoming water flow and pressure at the inlet valve with a pressure gauge.
- Test the water inlet valve solenoids for proper operation and continuity.
- Inspect the pressure switch and hose for leaks or faults.
- Replace faulty inlet valve or pressure switch components as needed.
Parts needed: Water inlet valve assembly, Pressure switch/sensor, Inlet hoses
- If after basic checks (hoses, screens, valves) the error persists repeatedly.
- If water inlet components (valve/pressure switch) test faulty or are difficult to access/replace safely.
Next step
Choose the next step for E22
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Water Inlet Valve
Controls the flow of hot and cold water into the appliance.
- Typical part-only price
- $25 - $60
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Pressure Switch
Detects the water level inside the tub and signals when to start or stop filling.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does E22 error mean on Westinghouse Washing Machine?
E22 indicates a water fill problem, causing the cycle to pause with the door locked.
Can I fix Westinghouse Washing Machine E22 error myself?
Yes, check water supply, hoses, and clean inlet valve screens as initial DIY actions.
How much does it cost to fix E22 error?
Repair costs range from USD 50 to 200+ depending on parts and labor.
When should I call a technician for E22?
Call a technician if the error persists after basic checks or if components are difficult to access.
Sources & References
- Westinghouse Australia Product Support (official)
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!