Westinghouse Washing Machine Error E02
⚡ Quick Answer: The Westinghouse Washing Machine E02 error indicates a drainage failure due to the lid or door being detected as open or not fully closed. This error ... ✅ DIY Fixable
What Does Error E02 Mean?
The Westinghouse Washing Machine E02 error indicates a drainage failure due to the lid or door being detected as open or not fully closed. This error often causes the machine to stop or refuse to start, accompanied by a loud humming sound and a paused cycle display. Ensure the lid/door is firmly closed and that nothing obstructs the latch to resolve this issue.
Common Symptoms:
- Washer stops or will not start with E02 displayed
- Machine detects lid/door not secured and refuses to run
Possible Causes
- Lid/door not fully closed or safety latch not engaged (high)
How to Fix Error E02
DIY Fix Ensure lid/door is fully closed
- Turn off the washing machine and unplug it.
- Open the lid/door fully and check for any obstruction or clothing caught in the edge.
- Close the lid/door firmly until the latch engages.
- Plug the machine back in and attempt to restart the cycle.
Technician Only Inspect door/lid latch and sensor
- Verify proper operation of the lid latch and safety interlock switch.
- Check wiring and connections to the door switch for continuity.
- Replace the door switch or latch mechanism if defective.
Parts needed: Lid/door latch assembly, Door safety interlock switch
- If the E02 code persists despite the lid/door being correctly closed and free of obstructions.
- If the door latch or safety switch shows signs of damage or intermittent behavior.
Next step
Choose the next step for E02
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Door Latch Assembly
Mechanically secures the appliance door and may operate a door-closed safety switch.
- Typical part-only price
- $15 - $80
- DIY difficulty
- Medium
- Estimated time
- 20-60 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Door or Lid Switch
Detects whether the appliance door or lid is safely closed before operation.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does E02 error mean on Westinghouse Washing Machine?
E02 indicates a drainage failure due to the lid or door being open or not fully closed.
Can I fix Westinghouse Washing Machine E02 error myself?
Yes, ensure the lid/door is fully closed and check for obstructions.
How much does it cost to fix E02 error?
The estimated repair cost is between ¥3,000 and ¥10,000 for parts and labor.
When should I call a technician for E02?
Call if E02 persists despite securing the lid/door or if the latch is damaged.
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!