Westinghouse Dryer Error EH0
⚡ Quick Answer: The Westinghouse dryer error EH0 indicates a malfunction related to power supply, often preventing the dryer from starting or producing heat. This may... ✅ DIY Fixable
What Does Error EH0 Mean?
The Westinghouse dryer error EH0 indicates a malfunction related to power supply, often preventing the dryer from starting or producing heat. This may result from unstable voltage, a faulty mains connection, or loose wiring. It's important to ensure your dryer is plugged into a properly grounded outlet and to check for tripped circuit breakers. If the issue persists after these checks, further inspection of the internal power components may be necessary.
Common Symptoms:
- Dryer refuses to start and immediately displays EH0
- Error appears when power is connected or cycle is selected
Possible Causes
- Power supply instability (voltage too high/too low/unstable) (medium)
- Faulty or loose mains connection / wiring fault (medium)
How to Fix Error EH0
DIY Fix Check basic power supply
- Ensure dryer is plugged directly into a properly grounded wall socket
- Try plugging another device into the same outlet to confirm power delivery
- Check household circuit breakers and fuses for tripped circuits
DIY Fix Reset dryer power
- Unplug dryer from power outlet
- Wait at least 30 seconds
- Plug it back in and attempt to start a cycle
Technician Only Inspect mains connection and internal power components
- Measure incoming voltage at dryer terminal block
- Inspect power cord and internal wiring for damage or loose connections
- Check main control board power input section for visible faults
Parts needed: power cord, wiring harness, control board
- If the dryer still shows EH0 after checking power supply and resetting
- If there are signs of electrical burning or unusual smells
- If you are uncomfortable working with mains electrical diagnostics
Next step
Choose the next step for EH0
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Power Cord
Supplies mains power to the appliance and includes the model-specific plug and terminal connection.
- Typical part-only price
- $15 - $70
- DIY difficulty
- Medium
- Estimated time
- 20-45 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Model-compatible Dryer parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dryer Vent Cleaning Kit
Helps remove routine lint buildup from an accessible dryer vent path. It does not diagnose or repair an E-code or failed component.
Lint Trap Cleaning Brush
A narrow brush for routine cleaning around an accessible lint screen and housing.
Dryer Vent Hose Kit
A replacement exhaust duct option for visibly crushed or damaged external venting. Check diameter, length, local code, and installation clearance.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does EH0 error mean on westinghouse dryer?
EH0 indicates a power supply malfunction, preventing the dryer from starting.
Can I fix westinghouse dryer EH0 error myself?
Yes, check the power supply, reset the dryer, and ensure all connections are secure.
How much does it cost to fix EH0 error?
Repair costs range from $50 to $300+, depending on parts and labor.
When should I call a technician for EH0?
Call a technician if the error persists after troubleshooting or if you notice electrical burning smells.
Sources & References
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!