Westinghouse Dryer Error E10
⚡ Quick Answer: The Westinghouse Dryer E10 error code indicates a potential malfunction with the heating element, leading to insufficient or no heat during the drying... ✅ DIY Fixable
What Does Error E10 Mean?
The Westinghouse Dryer E10 error code indicates a potential malfunction with the heating element, leading to insufficient or no heat during the drying cycle. This issue can disrupt your laundry routine and requires prompt attention. To resolve this, verify the error against your model's user manual, ensuring you have the correct model number. If the error persists and basic troubleshooting steps don't resolve it, professional assistance may be necessary.
Possible Causes
- Heating Element
How to Fix Error E10
DIY Fix Verify the error and consult model‑specific documentation
- Double‑check the error code display against the dryer model’s user manual.
- Locate the exact model number sticker on your dryer (often inside the door or on the back).
- Search for the model‑specific Westinghouse dryer manual on the manufacturer’s support site.
- If available, follow the official troubleshooting guidance for E10 in that specific manual.
Technician Only Contact Westinghouse support or certified appliance technician
- Provide the model and serial number of your dryer.
- Describe when the E10 appears (startup, during drying, after heating step, etc.).
- Request the official meaning of E10 for this specific dryer model.
- Have a technician use diagnostic tools to read the control board and component status.
- If the dryer displays errors consistently without official documentation to interpret them
- If attempting basic checks (e.g., reset or power cycle) does not clear E10
- If there’s risk of electrical shock or damage during inspection
Next step
Choose the next step for E10
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Heating Element
Heats the water or air inside the appliance to the required temperature.
- Typical part-only price
- $40 - $95
- DIY difficulty
- Medium
- Estimated time
- 30-45 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Dryer parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dryer Vent Cleaning Kit
Helps remove routine lint buildup from an accessible dryer vent path. It does not diagnose or repair an E-code or failed component.
Lint Trap Cleaning Brush
A narrow brush for routine cleaning around an accessible lint screen and housing.
Dryer Vent Hose Kit
A replacement exhaust duct option for visibly crushed or damaged external venting. Check diameter, length, local code, and installation clearance.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does E10 error mean on Westinghouse Dryer?
E10 indicates a potential heating element malfunction, causing no heat during drying.
Can I fix Westinghouse Dryer E10 error myself?
Yes, you can verify the error code and consult the user manual for troubleshooting steps.
How much does it cost to fix E10 error?
Repair costs vary by model and region, as no specific parts have been identified.
When should I call a technician for E10?
Call a technician if the error persists after basic checks or poses safety risks.
Sources & References
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!