Westinghouse Dryer Error E63
⚡ Quick Answer: The Westinghouse Dryer error E63 typically signals a malfunction in the heating element, which can prevent the dryer from generating heat. This issue ... ✅ DIY Fixable
What Does Error E63 Mean?
The Westinghouse Dryer error E63 typically signals a malfunction in the heating element, which can prevent the dryer from generating heat. This issue may also cause the dryer to stop or fail to complete its drying cycle. If you encounter this error, it's advisable to perform basic checks such as cleaning the lint filter and ensuring the vent is unobstructed. Persistent issues may require professional assessment.
Common Symptoms:
- Dryer displays E63 error and may stop or fail to complete cycle (reported for other brands).
Possible Causes
- Heating Element
How to Fix Error E63
DIY Fix Basic checks and power reset
- Unplug the dryer from its power source for several minutes and then reconnect — this may reset control electronics if the error is a transient glitch.
- Ensure the dryer’s vent and lint filter are clean and free of obstruction (clear airflow can prevent overheating).
- Check external vent hose for kinks or clogs.
Technician Only Electrical and heating system testing
- Measure incoming voltage at the dryer’s power cord connections to confirm correct supply.
- Test continuity of heating elements, thermostats, and temperature sensors with a multimeter.
- Inspect wiring harnesses for loose or damaged connections.
- If sensor/thermostat circuits and heating elements are okay, inspect or test the control board.
Parts needed: Heating element, Thermostat/thermal cut‑off, Temperature sensors/thermistors, Control board
- If the error persists after basic user checks.
- If opening the dryer and testing or replacing internal electrical components is required.
- If the dryer exhibits signs of overheating, burning smells, or unusual noises.
Next step
Choose the next step for E63
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Heating Element
Heats the water or air inside the appliance to the required temperature.
- Typical part-only price
- $40 - $95
- DIY difficulty
- Medium
- Estimated time
- 30-45 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other components that may be involved
Check these only if your diagnosis points to them.
Thermostat
Regulates temperature by turning the heating or cooling system on or off.
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Technical Specifications
| wattage | 5400W |
|---|---|
| component | Heating Element |
| resistance | 10-30 ohms |
| part_number | WPW10116722 |
| voltage_rating | 240V AC |
Common Questions
What does E63 error mean on Westinghouse Dryer?
E63 indicates a heating element malfunction, preventing heat production.
Can I fix Westinghouse Dryer E63 error myself?
Yes, try basic checks like resetting power and cleaning the vent.
How much does it cost to fix E63 error?
Estimated repair costs range from $100 to $400+, depending on parts and labor.
When should I call a technician for E63?
Call a technician if the error persists after basic checks or if overheating occurs.
Sources & References
Data last verified: 2026-07-22
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!