Westinghouse Dryer Error E60
⚡ Quick Answer: The Westinghouse Dryer E60 error indicates a malfunction in the heating element, preventing the dryer from producing heat. Common symptoms include the... ✅ DIY Fixable
What Does Error E60 Mean?
The Westinghouse Dryer E60 error indicates a malfunction in the heating element, preventing the dryer from producing heat. Common symptoms include the dryer stopping mid-cycle, tumbling without heating, and leaving clothes wet after a drying cycle. This issue may result from a heating system fault or airflow restrictions that trigger safety mechanisms. Addressing airflow and checking the heating components are essential for resolution.
Common Symptoms:
- Dryer stops mid‑cycle with E60 displayed
- Dryer tumbles but does not heat
- Drying cycle incomplete or clothes remain wet
Possible Causes
- Heating system fault (no heat detected / overheating) (medium)
- Airflow/ventilation restriction leading to overheating/triggering protection (medium)
How to Fix Error E60
DIY Fix Basic checks and reset
- Unplug the dryer for 5–10 minutes and restore power to attempt a reset.
- Ensure lint filter is clean.
- Check external vent hose for blockages or kinks and clear lint buildup where accessible.
- Confirm the dryer has sufficient space around it for proper ventilation.
Technician Only Inspect heating and safety components
- Remove access panels with power disconnected.
- Test thermal fuse/temperature cut‑outs for continuity; replace if open/failed.
- Test heating element for continuity; replace if faulty.
- Inspect airflow path and blower assembly for obstructions.
- Check thermostats/thermistors and replace any out of specification.
- Verify control board operation if other components test OK.
Parts needed: Thermal fuse/thermal cut‑out, Heating element, Thermostats/thermistors, Control board (if needed), Vent hose/ducting parts
- If basic user‑level checks don’t clear the error
- If multimeter testing reveals failed components
- If internal inspection is beyond safe DIY capability
Next step
Choose the next step for E60
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Thermal Fuse
A safety device that cuts off power to the appliance if it starts to overheat.
- Typical part-only price
- $10 - $20
- DIY difficulty
- Easy
- Estimated time
- 10-20 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Heating Element
Heats the water or air inside the appliance to the required temperature.
Thermistor
Measures precise temperature changes and sends resistance feedback to the control board.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Model-compatible Dryer parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dryer Vent Cleaning Kit
Helps remove routine lint buildup from an accessible dryer vent path. It does not diagnose or repair an E-code or failed component.
Lint Trap Cleaning Brush
A narrow brush for routine cleaning around an accessible lint screen and housing.
Dryer Vent Hose Kit
A replacement exhaust duct option for visibly crushed or damaged external venting. Check diameter, length, local code, and installation clearance.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 5400W |
|---|---|
| component | Heating Element |
| resistance | 10-30 ohms |
| part_number | WPW10127425 |
| voltage_rating | 240V AC |
Common Questions
What does E60 error mean on Westinghouse Dryer?
E60 indicates a heating element malfunction, causing the dryer to lack heat during cycles.
Can I fix Westinghouse Dryer E60 error myself?
Yes, you can perform basic checks like resetting the dryer, cleaning the lint filter, and inspecting the vent hose.
How much does it cost to fix E60 error?
Repair costs range from $50 to $300+, depending on the specific parts and labor needed.
When should I call a technician for E60?
Call a technician if basic checks don't resolve the issue or if internal inspections are beyond your capability.
Sources & References
Data last verified: 2026-07-22
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!