Westinghouse Dryer Error E5A
⚡ Quick Answer: The Westinghouse dryer error code E5A indicates a potential malfunction in the heating element, leading to the dryer not producing heat during operati... ✅ DIY Fixable
What Does Error E5A Mean?
The Westinghouse dryer error code E5A indicates a potential malfunction in the heating element, leading to the dryer not producing heat during operation. This issue can stem from various factors, including problems with the thermal fuse, temperature sensors, or control board wiring. To address the E5A error, users should perform basic checks and refer to their user manual for troubleshooting advice.
Possible Causes
- Heating Element
How to Fix Error E5A
DIY Fix Check basic dryer operation and indicators
- Refer to your specific model’s user manual for any listed error codes (many Westinghouse dryer manuals include a troubleshooting section).
- Power cycle the dryer by unplugging it for several minutes, then plug it back in and attempt a normal cycle.
- Confirm that the dryer door is fully closed and the lint filter is clean.
- Ensure the dryer is properly ventilated and not overloaded.
Technician Only Inspect for general dryer faults
- Use the service manual (if available for your model) to verify if 'E5A' is a documented code.
- Check wiring harnesses, control board connections, and sensors for faults or damage.
- Inspect common dryer fault components (thermal fuse, thermostats, motor) based on general dryer troubleshooting procedures.
Parts needed: Thermal fuse, Temperature sensors, Control board wiring
- If the dryer continues to display an undefined error code (like E5A) after basic resets and checks.
- If there are signs of electrical issues, burning smell, smoke, or sounds indicating internal failure.
Next step
Choose the next step for E5A
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Thermal Fuse
A safety device that cuts off power to the appliance if it starts to overheat.
- Typical part-only price
- $10 - $20
- DIY difficulty
- Easy
- Estimated time
- 10-20 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other components that may be involved
Check these only if your diagnosis points to them.
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Technical Specifications
| wattage | 5400W |
|---|---|
| component | Heating Element |
| resistance | 10-30 ohms |
| part_number | WH01X10001 |
| voltage_rating | 240V AC |
Common Questions
What does E5A error mean on Westinghouse dryer?
E5A indicates a malfunction in the heating element, causing no heat during operation.
Can I fix Westinghouse dryer E5A error myself?
Yes, check the dryer operation, power cycle it, and ensure the door is closed and lint filter is clean.
How much does it cost to fix E5A error?
Repair costs typically range from $50 to $200+, depending on diagnosis and parts needed.
When should I call a technician for E5A?
Call a technician if the error persists after basic checks or if you notice electrical issues.
Sources & References
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!