Westinghouse Dryer Error E51

⚡ Quick Answer: The Westinghouse Dryer error E51 indicates a potential issue with the motor control unit, preventing the dryer from starting or leading to unusual cli... ✅ DIY Fixable

What Does Error E51 Mean?

The Westinghouse Dryer error E51 indicates a potential issue with the motor control unit, preventing the dryer from starting or leading to unusual clicking sounds. To troubleshoot, start by ensuring that the dryer door is securely closed, and check the lint filter and vent for blockages. If the error persists after performing these checks, further investigation may be required.

Possible Causes

  • Motor Control Board
  • Wiring Issues
  • Faulty Motor

How to Fix Error E51

DIY Fix General basic checks

  1. Turn off and unplug the dryer for a few minutes, then plug it back in to see if the code clears.
  2. Ensure the dryer door is fully closed and latched.
  3. Check lint filter and vent for heavy blockage and clean if needed.
  4. Try a cycle with minimal load to see if error recurs.
🛑 When to Call a Pro:
  • If the error persists after basic checks and clearing vents/filters.
  • If the dryer does not operate normally (no heat, no drum rotation) alongside the error code.
  • If unusual sounds, burning smell, or smoke accompany the error.

Next step

Choose the next step for E51

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Dryer Vent Cleaning Kit

Helps remove routine lint buildup from an accessible dryer vent path. It does not diagnose or repair an E-code or failed component.

View maintenance supply
Maintenance supply

Lint Trap Cleaning Brush

A narrow brush for routine cleaning around an accessible lint screen and housing.

View maintenance supply
Maintenance supply

Dryer Vent Hose Kit

A replacement exhaust duct option for visibly crushed or damaged external venting. Check diameter, length, local code, and installation clearance.

View maintenance supply

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Technical Specifications

note The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering.
part_number None

Common Questions

What does E51 error mean on Westinghouse Dryer?

E51 indicates a potential malfunction in the motor control unit, affecting dryer operation.

Can I fix Westinghouse Dryer E51 error myself?

Yes, try turning off the dryer, checking the door latch, and cleaning the lint filter and vent.

How much does it cost to fix E51 error?

Repair cost varies by model and region; consult a local technician for specifics.

When should I call a technician for E51?

Call if the error persists after basic checks or if you experience abnormal dryer behavior.

Data last verified: 2026-07-31

User Comments (0)

Share your experience or solution below.

Be the first to comment!

Call Local Repair Provider +1 (888) 217-6318