Westinghouse Dryer Error E50

⚡ Quick Answer: The Westinghouse Dryer error code E50 typically indicates a failure in the motor drive unit, leading to issues such as the drum not rotating and an au... ✅ DIY Fixable

What Does Error E50 Mean?

The Westinghouse Dryer error code E50 typically indicates a failure in the motor drive unit, leading to issues such as the drum not rotating and an audible humming sound during operation. This error may also be linked to software or control system faults. If you encounter this code, it is important to address it promptly to avoid further damage and ensure the dryer operates efficiently.

Common Symptoms:

  • Dryer stops mid‑cycle with E50 displayed (based on Electrolux sources)
  • Drum may not turn or rotate
  • Drying cycle fails to complete

Possible Causes

  • No official Westinghouse documentation found linking E50 to a specific fault on a Westinghouse dryer (high)
  • In related Electrolux‑group dryer models, E50 is associated with motor or software/drive issues (medium)

How to Fix Error E50

DIY Fix Basic reset attempt

  1. Disconnect the dryer from the power outlet.
  2. Wait at least 30 seconds.
  3. Reconnect power and attempt to run a cycle to see if the code clears.

Technician Only Inspect motor/drive and control system

  1. Access internal components and inspect motor connections, drive belt, and motor control circuitry.
  2. Test motor functionality with appropriate diagnostic tools.
  3. Check for software/control faults via service diagnostics (if available).

Parts needed: Motor, Drive assembly, Control board/modules

🛑 When to Call a Pro:
  • Error code persists after reset attempts
  • Dryer fails to start or drum does not rotate
  • Unusual sounds, burning smells, or overheating are present

Next step

Choose the next step for E50

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

Main Control Board

The central brain of the appliance that controls all components, cycles, and timings.

Typical part-only price
$120 - $280
DIY difficulty
Medium
Estimated time
20-40 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage 5000W
component Motor Drive Unit
resistance 1-5 ohms
part_number WPW10111905
voltage_rating 240V AC

Common Questions

What does E50 error mean on Westinghouse Dryer?

E50 indicates a motor drive unit failure, causing the drum to stop rotating and a humming sound.

Can I fix Westinghouse Dryer E50 error myself?

Yes, you can try a basic reset by disconnecting power for 30 seconds and reconnecting it.

How much does it cost to fix E50 error?

Repair costs vary widely, especially for motor or control board replacements, which tend to be higher.

When should I call a technician for E50?

Call a technician if the error persists after resetting or if you notice unusual sounds or overheating.

Sources & References

Data last verified: 2026-07-22

User Comments (0)

Share your experience or solution below.

Be the first to comment!