Westinghouse Dryer Error E32
⚡ Quick Answer: The Westinghouse Dryer error E32 typically indicates an issue with the heating element, leading to inadequate heating during the drying cycle. If your... ✅ DIY Fixable
What Does Error E32 Mean?
The Westinghouse Dryer error E32 typically indicates an issue with the heating element, leading to inadequate heating during the drying cycle. If your dryer is not producing heat, it is essential to conduct some preliminary troubleshooting such as checking the door latch, cleaning the lint filter, and ensuring that the dryer is correctly powered. Persistent issues may require professional diagnosis and repair.
Possible Causes
- Heating Element
How to Fix Error E32
DIY Fix General Troubleshooting Steps
- Disconnect the dryer from power and wait a few minutes before reconnecting — this can clear transient faults.
- Check that the dryer door is fully closed and latched.
- Ensure the lint filter and venting are clean and free of obstructions to avoid overheating or drying issues.
- Try running a basic cycle with no load to see if the error persists.
Technician Only Professional Diagnosis Recommended
- Retrieve the exact model number of the Westinghouse dryer and consult the specific service manual or manufacturer support.
- Use diagnostic tools to read the internal error logs or service codes (if the unit supports service mode).
- Inspect door switches, moisture sensors, temperature sensors, and wiring harnesses for faults.
Parts needed: Moisture sensor, Door switch, Control board (if needed)
- If the error code persists after basic resets and cleaning.
- If the dryer shows additional symptoms such as no heating, unusual noises, or failure to start cycles.
- If you are uncomfortable accessing internal components.
Next step
Choose the next step for E32
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Dryer Moisture Sensor
Detects moisture in clothing so automatic drying cycles can stop at the selected dryness level.
- Typical part-only price
- $10 - $50
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Door or Lid Switch
Detects whether the appliance door or lid is safely closed before operation.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Model-compatible Dryer parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dryer Vent Cleaning Kit
Helps remove routine lint buildup from an accessible dryer vent path. It does not diagnose or repair an E-code or failed component.
Lint Trap Cleaning Brush
A narrow brush for routine cleaning around an accessible lint screen and housing.
Dryer Vent Hose Kit
A replacement exhaust duct option for visibly crushed or damaged external venting. Check diameter, length, local code, and installation clearance.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 5400W |
|---|---|
| component | Heating Element |
| resistance | 10-30 ohms |
| part_number | W10709354 |
| voltage_rating | 240V AC |
Common Questions
What does E32 error mean on Westinghouse Dryer?
E32 typically indicates a malfunction in the heating element, causing no heat during drying.
Can I fix Westinghouse Dryer E32 error myself?
Yes, you can try basic troubleshooting like resetting the dryer and checking the lint filter.
How much does it cost to fix E32 error?
Repair costs can vary; a sensor replacement may cost around $50–$150, while a control board replacement can range from $150–$300.
When should I call a technician for E32?
Call a technician if the issue persists after troubleshooting or if you notice additional problems like unusual noises.
Sources & References
Data last verified: 2026-07-22
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!