Westinghouse Dryer Error E23

⚡ Quick Answer: The Westinghouse Dryer error code E23 typically indicates a problem with the heating element. This malfunction may prevent the dryer from producing he... ⚠️ Difficulty Varies

What Does Error E23 Mean?

The Westinghouse Dryer error code E23 typically indicates a problem with the heating element. This malfunction may prevent the dryer from producing heat during its operation, leading to inefficient drying cycles. To address this issue, it's recommended to consult your model-specific documentation for troubleshooting steps or to contact Westinghouse support for further assistance.

Possible Causes

  • Heating Element
  • Thermal Fuse
  • Wiring Issues

How to Fix Error E23

DIY Fix Check for model‑specific documentation

  1. Locate the exact model number of your Westinghouse dryer (e.g., from the sticker on the dryer door or back panel).
  2. Search the Westinghouse/Electrolux (OEM brand) support site or printed user manual for that model to see if E23 is listed.
  3. If available, consult the appropriate section in the manual for guidance.

DIY Fix Contact Westinghouse or retailer support

  1. Contact Westinghouse customer support or the retailer you purchased the dryer from.
  2. Provide the exact model number and describe when E23 appears.
  3. Ask specifically for the meaning of E23 for that model and recommended service procedures.

Technician Only Professional diagnostic

  1. Use a diagnostic tool or manufacturer service manual specific to the dryer’s model to read error history and component tests.
  2. Check wiring harnesses, sensors, and control board connections for faults that could trigger advanced error flags.
  3. Refer to OEM error code definitions.
🛑 When to Call a Pro:
  • If the error persists after consulting official documentation or support.
  • If the dryer shows additional abnormal behavior (smoke, burning smell, no start).

Next step

Choose the next step for E23

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Check during diagnosis

Most relevant component to inspect

Heating Element

Heats the water or air inside the appliance to the required temperature.

Typical part-only price
$40 - $95
DIY difficulty
Medium
Estimated time
30-45 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other components that may be involved

Check these only if your diagnosis points to them.

Possible related component

Thermal Fuse

A safety device that cuts off power to the appliance if it starts to overheat.

$10 - $20 · Easy · 10-20 mins

Check fit & price

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage 5400W
component Heating Element
resistance 10-30 ohms
part_number WH01X10302
voltage_rating 240V AC

Common Questions

What does E23 error mean on Westinghouse Dryer?

The E23 error indicates a malfunction in the heating element, preventing the dryer from producing heat.

Can I fix Westinghouse Dryer E23 error myself?

You can check model-specific documentation and contact Westinghouse support for guidance.

How much does it cost to fix E23 error?

Repair costs vary by model and region; consult a technician for an accurate estimate.

When should I call a technician for E23?

Call a technician if the error persists or if you notice unusual symptoms like smoke or burning smells.

Data last verified: 2026-07-22

User Comments (0)

Share your experience or solution below.

Be the first to comment!