Westinghouse Dishwasher Error i80
⚡ Quick Answer: The Westinghouse Dishwasher error code i80 indicates a malfunction in the drain pump, which may result in failure to drain water and unusual operation... ✅ DIY Fixable
What Does Error i80 Mean?
The Westinghouse Dishwasher error code i80 indicates a malfunction in the drain pump, which may result in failure to drain water and unusual operational noises. Users may experience erratic behavior, such as the inability to start a wash cycle. A power reset may temporarily resolve the issue, but persistent errors could signal deeper problems requiring professional service.
Common Symptoms:
- Display of code i80 and failure to start a wash cycle (reported for Electrolux models).
- Erratic dishwasher behavior or inability to proceed normally (Electrolux references).
Possible Causes
- Drain Pump Assembly
- Blocked Drain Hose
- Faulty Control Board
How to Fix Error i80
DIY Fix Power Reset Attempt
- Turn off the dishwasher and unplug it from power (or switch off its breaker).
- Wait approximately 1 minute.
- Reconnect the power and attempt to start a normal wash cycle.
Technician Only Diagnostic Service Check
- Check main control board and wiring for faults (Electrolux sources list control/PCB issues with i80).
- Inspect door latch/switch assembly for proper operation (Electrolux i80 related causes include latch defects).
- Run manufacturer-specific service diagnostics, if available, to pinpoint error triggers.
- Replace defective control board or door switch/latch as indicated by service diagnostics.
Parts needed: Control board (main PCB), Door latch/switch assembly
- If the error persists after attempting a power reset.
- If there are signs of electrical issues (frequent resets needed, unrelated error codes).
- If door latch malfunction is suspected.
Next step
Choose the next step for i80
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
- Typical part-only price
- $120 - $280
- DIY difficulty
- Medium
- Estimated time
- 20-40 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Door Latch Assembly
Mechanically secures the appliance door and may operate a door-closed safety switch.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does i80 error mean on Westinghouse Dishwasher?
The i80 error means there's a malfunction in the drain pump, causing failure to drain water.
Can I fix Westinghouse Dishwasher i80 error myself?
Yes, you can try a power reset by unplugging the dishwasher for a minute and then reconnecting.
How much does it cost to fix i80 error?
Repair costs typically range from $150 to $500+, depending on parts and labor.
When should I call a technician for i80?
Call a technician if the error persists after a reset or if you suspect electrical issues.
Sources & References
- Dishwasher displays error code i80 | Electrolux (community)
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!