Westinghouse Dishwasher Error i60
⚡ Quick Answer: The Westinghouse Dishwasher error code i60 typically indicates a malfunction related to the drain pump, which may result in unusual noises or the dish... ✅ DIY Fixable
What Does Error i60 Mean?
The Westinghouse Dishwasher error code i60 typically indicates a malfunction related to the drain pump, which may result in unusual noises or the dishwasher's failure to drain water. If you encounter this error, it is advisable to check for any blockages in the drain system and ensure that the drain pump is functioning correctly. A basic reset of the dishwasher may also resolve the issue.
Possible Causes
- Drain Pump Assembly
- Blocked Drain Hose
- Faulty Control Board
How to Fix Error i60
DIY Fix Locate and reference the exact model’s manual
- Find the model number on the rating plate of your Westinghouse dishwasher (usually on the door edge or side panel).
- Search for the official manual for that model on Westinghouse’s website or a manual archive (e.g., westinghouse.manymanuals.com).
- Look for a "Fault Codes" or "Troubleshooting" section to see if i60 is documented specifically for your model.
DIY Fix Basic reset attempt
- Turn off and unplug the dishwasher or turn off its circuit breaker.
- Wait approximately 1 minute.
- Restore power and attempt to restart a wash cycle.
- If the error persists after manual lookup and basic reset, contact Westinghouse support or a qualified appliance technician, as the meaning of i60 on Westinghouse units is not documented publicly.
Next step
Choose the next step for i60
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other components that may be involved
Check these only if your diagnosis points to them.
Drain Hose
Carries waste water from the drain pump to your home's standpipe or sink drain.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Technical Specifications
| wattage | 50W |
|---|---|
| component | Drain Pump Assembly |
| resistance | 10-20 ohms |
| part_number | WDW-PUMP-001 |
| voltage_rating | 120V AC |
Common Questions
What does i60 error mean on Westinghouse Dishwasher?
The i60 error indicates a potential malfunction in the drain pump, possibly causing drainage issues.
Can I fix Westinghouse Dishwasher i60 error myself?
Yes, you can attempt a basic reset and check for blockages in the drain system.
How much does it cost to fix i60 error?
Repair costs for the i60 error can vary by model and region.
When should I call a technician for i60?
Call a technician if the error persists after troubleshooting or resetting the appliance.
Sources & References
- Westinghouse dishwasher manuals listing (official)
- Dishwasher displays error code i60 / Electrolux (community)
- Dishwasher displays error message i60 | AEG (community)
Data last verified: 2026-07-22
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!