Viking Dishwasher Error 2-3
⚡ Quick Answer: The Viking Dishwasher error code 2-3 indicates a low water level issue, preventing the appliance from completing its wash cycle. This error typically ... ✅ DIY Fixable
What Does Error 2-3 Mean?
The Viking Dishwasher error code 2-3 indicates a low water level issue, preventing the appliance from completing its wash cycle. This error typically arises when the dishwasher fails to detect sufficient water, resulting in unusual noises during operation. Common causes include a malfunctioning water level sensor or blocked/kinked fill lines. If the error persists after troubleshooting, further inspection of the water level sensor and associated components is recommended.
Common Symptoms:
- Dishwasher stops mid‑cycle with code 2‑3 displayed
- Dishwasher does not proceed with wash due to insufficient detected water level
- Symptoms not fixed by simple reset
Possible Causes
- Low water level/level sensor not detecting proper fill (medium)
- Blocked or kinked fill line or insufficient water fill (medium)
How to Fix Error 2-3
DIY Fix Check water supply and basic conditions
- Ensure water supply valve to dishwasher is fully open
- Check that the fill hose is not kinked or blocked
- Make sure dishwasher is level and not tilted excessively
- Verify that no dishes are positioned in a way that traps water around the internal low level sensor area
Technician Only Inspect and test water level sensor and related components
- Access the dishwasher’s internal level/pressure sensor assembly
- Check for sensor blockage, debris, or membrane damage
- Test the sensor with proper diagnostic tools to confirm operation
- Replace faulty water level sensor or repair associated wiring if defective
Parts needed: Water level/pressure sensor, Fill hose, Associated wiring connectors
- If the error persists after checking water supply and hoses
- If the sensor assembly tests faulty or is inaccessible to user‑level troubleshooting
Next step
Choose the next step for 2-3
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Water Supply Hose
Connects your home water valves to the water inlet valve on the appliance.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 10-15 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does 2-3 error mean on Viking Dishwasher?
The 2-3 error indicates low water level detection, stopping the wash cycle.
Can I fix Viking Dishwasher 2-3 error myself?
Yes, check the water supply, fill hose, and ensure the dishwasher is level.
How much does it cost to fix 2-3 error?
Estimated repair costs range from $50 to $250, depending on parts and labor.
When should I call a technician for 2-3?
Call a technician if the error persists after your checks or if the sensor is faulty.
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!