Viking Dishwasher Error 3-3
⚡ Quick Answer: The Viking Dishwasher error 3-3 indicates a potential issue with the drain pump, which may be accompanied by unusual sounds during operation. To addre... ✅ DIY Fixable
What Does Error 3-3 Mean?
The Viking Dishwasher error 3-3 indicates a potential issue with the drain pump, which may be accompanied by unusual sounds during operation. To address this error, start by consulting your model’s Use & Care manual for specific guidance. If the problem persists, a power reset may help: turn off the power at the breaker for 60 seconds before restoring it. Additionally, check for obstructions in the water supply or inlet valve, as these are common issues that affect Viking dishwashers.
Possible Causes
- Drain Pump
- Blocked Drain Hose
- Faulty Control Board
How to Fix Error 3-3
DIY Fix Check for general issues and reset
- Consult your specific model’s Use & Care manual for error code lists — many Viking manuals do not list a 3‑3 code directly.
- Try a basic power reset: turn off power at the breaker, wait 60 seconds, then restore power and restart the dishwasher.
- Check for obvious water supply or fill issues (ensure inlet valve and hose are not blocked) as common Viking dishwasher issues involve water/overheat faults.
Technician Only Professional diagnostic required
- Have a certified technician connect a service meter or diagnostic tool to read stored fault codes; many Viking dishwashers communicate errors internally without a direct user code listing.
- Technician to inspect sensors (e.g., NTC temperature sensor), water inlet valve, float assembly, and control board connections — common areas related to water intake/temperature faults reported in community troubleshooting guides.
Parts needed: Diagnostic tool, possible sensors (temperature, float), water inlet valve
- If the error persists after basic reset and external checks, or if water leaks, electrical smells, or repeated failures occur.
Next step
Choose the next step for 3-3
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Water Inlet Valve
Controls the flow of hot and cold water into the appliance.
- Typical part-only price
- $25 - $60
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does 3-3 error mean on Viking Dishwasher?
Error 3-3 suggests a problem with the drain pump, causing unusual sounds during operation.
Can I fix Viking Dishwasher 3-3 error myself?
Yes, check for blockages, perform a power reset, and consult your manual for guidance.
How much does it cost to fix 3-3 error?
Repair costs vary based on diagnostic time and parts needed, including technician labor.
When should I call a technician for 3-3?
Call a technician if the error persists after trying a reset or if you notice leaks or electrical odors.
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!