Viking Dishwasher Error 1-3

⚡ Quick Answer: The Viking Dishwasher error code 1-3 indicates a motor control communication fault, where the motor control board fails to communicate properly with o... ✅ DIY Fixable

What Does Error 1-3 Mean?

The Viking Dishwasher error code 1-3 indicates a motor control communication fault, where the motor control board fails to communicate properly with other components. This typically results in the dishwasher halting mid-cycle, flashing fault indicator lights, and an inability to start normal wash operations. A common sign accompanying this issue is a humming sound, along with water not draining effectively.

Common Symptoms:

  • Dishwasher cycle halts shortly after starting or mid‑cycle
  • Flashing fault indicator lights corresponding to error pattern
  • No normal wash operation despite pressing Start

Possible Causes

  • Motor control board communication fault (medium)

How to Fix Error 1-3

DIY Fix Basic checks and reset

  1. Power off the dishwasher and disconnect from electrical supply.
  2. Wait 1–2 minutes, then reconnect power to attempt clearing the error.
  3. Ensure no loading obstructions are impacting normal operation.

Technician Only Motor control communication diagnosis and repair

  1. Inspect wiring harnesses and connectors between the motor control board and main control board for signs of damage or poor connection.
  2. Test motor control board communication signals using diagnostic tools per manufacturer service manual procedures.
  3. Replace faulty motor control board or main control board if communication faults persist.

Parts needed: Motor control board, Main control board, Wiring harness/connector

🛑 When to Call a Pro:
  • If the error persists after basic reset and visual checks.
  • If the dishwasher exhibits electrical issues (e.g., unusual sparks, burning smell).
  • If you are not experienced with motor control diagnostics or accessing internal electronic components.

Technical Specifications

wattage 50W
component Drain Pump Assembly
resistance 10-30 ohms
part_number Viking 000000000
voltage_rating 120V AC

Common Questions

What does 1-3 error mean on Viking Dishwasher?

The 1-3 error indicates a communication fault with the motor control board, causing the dishwasher to halt mid-cycle.

Can I fix Viking Dishwasher 1-3 error myself?

Yes, you can perform basic checks and reset the dishwasher by disconnecting it from power for 1-2 minutes.

How much does it cost to fix 1-3 error?

Repair costs for the 1-3 error range from $150 to $500+, depending on parts and labor.

When should I call a technician for 1-3?

Call a technician if the error persists after a reset or if you notice electrical issues like sparks or burning smells.

Data last verified: 2026-03-25

User Comments (0)

Share your experience or solution below.

Be the first to comment!