Viking Dishwasher Error 1-1
⚡ Quick Answer: The Viking Dishwasher error code 1-1 indicates a malfunction in the flood/pan sensor, which may prevent the dishwasher from filling with water. This e... ✅ DIY Fixable
What Does Error 1-1 Mean?
The Viking Dishwasher error code 1-1 indicates a malfunction in the flood/pan sensor, which may prevent the dishwasher from filling with water. This error often results in the appliance stopping mid-cycle, with no visible water leak. If the flood/pan sensor is disconnected or triggered, it can lead to unusual sounds during operation. Proper diagnosis and repair of the sensor circuit is crucial for restoring normal function.
Common Symptoms:
- Dishwasher stops mid‑cycle
- Error code 1‑1 displayed on control panel
- No obvious water leak but flood/pan sensor triggers
Possible Causes
- Flood/pan sensor circuit disconnected or triggered (medium)
How to Fix Error 1-1
DIY Fix Power Reset and Basic Check
- Turn off the dishwasher and disconnect power (unplug or turn off circuit breaker).
- Wait 1–2 minutes then restore power.
- Restart the dishwasher to see if the error clears.
- Check for any visible water around the base or under the dishwasher that may have triggered the flood sensor.
Technician Only Inspect and Repair Flood Sensor Circuit
- Inspect the flood/pan sensor and its wiring harness for disconnections or corrosion.
- Test the flood sensor for proper operation with a multimeter according to service manual specs.
- Replace the flood/pan sensor or harness if defective.
- Verify no actual water leak is present in the base tray or around tub.
Parts needed: Flood/pan sensor assembly, Wiring harness/connectors
- If error persists after a proper reset and no obvious water leak is found
- If there is evidence of internal water leakage
- If flood/pan sensor tests show open circuits or intermittent signals
Next step
Choose the next step for 1-1
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
- Typical part-only price
- $20 - $120
- DIY difficulty
- Medium
- Estimated time
- 30-90 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does 1-1 error mean on Viking Dishwasher?
Error 1-1 indicates a malfunction in the flood/pan sensor, causing the dishwasher to stop mid-cycle.
Can I fix Viking Dishwasher 1-1 error myself?
Yes, try performing a power reset by turning off the dishwasher, waiting 1-2 minutes, and then restoring power.
How much does it cost to fix 1-1 error?
Repair costs for error 1-1 are low to moderate, covering the sensor and labor.
When should I call a technician for 1-1?
Call a technician if the error persists after a reset, if there's internal leakage, or if sensor tests show issues.
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!