Tcl Dishwasher Error E2

⚡ Quick Answer: The TCL Dishwasher E2 error code indicates a drainage issue, often resulting in water remaining in the bottom of the unit after a cycle. This problem ... ✅ DIY Fixable

What Does Error E2 Mean?

The TCL Dishwasher E2 error code indicates a drainage issue, often resulting in water remaining in the bottom of the unit after a cycle. This problem can arise from a blockage in the drainage path, a malfunctioning drain pump, or improper installation of the drain hose. If the dishwasher makes unusual sounds during operation or fails to complete cycles, it is crucial to address the underlying cause promptly to ensure effective cleaning performance.

Common Symptoms:

  • Dishwasher displays E2 error code
  • Water remains in the bottom of the dishwasher after or during a cycle
  • Dishwashing cycle does not complete due to inability to drain

Possible Causes

  • Drainage blockage (filter, drain hose) (medium)
  • Malfunctioning drain pump (medium)
  • Improper drain hose installation (kinks/incorrect slope) (medium)

How to Fix Error E2

DIY Fix Check and Clear Drainage Path

  1. Turn off the dishwasher and disconnect the power.
  2. Remove and inspect the dishwasher’s drain filter (usually at the tub bottom) for debris, and clean it.
  3. Inspect the drain hose for kinks, twists, or obstructions. Straighten the hose if needed and remove any blockages visible.
  4. Reinstall components and test the dishwasher by running a short cycle to see if the E2 error clears.

Technician Only Inspect and Service Drain Pump / Internal Components

  1. Remove access panels as required to reach the drain pump.
  2. Inspect the drain pump for mechanical failure, blocked impellers, or motor issues.
  3. Test electrical connections for continuity and proper operation.
  4. Replace the drain pump if malfunctioning or damaged.

Parts needed: Drain pump assembly, Hoses, Filter

🛑 When to Call a Pro:
  • If blockage clearing and basic drain inspection do not resolve the E2 error.
  • If the drain pump is suspected to be faulty (no sound during drain phase, visible damage).
  • If internal electrical components or control board may be involved.

Technical Specifications

wattage 50W
component Drain Pump
resistance 30-50 ohms
part_number TCL-PUMP-001
voltage_rating 120V AC

Common Questions

What does E2 error mean on TCL Dishwasher?

E2 error indicates a drainage issue, often with water remaining in the dishwasher.

Can I fix TCL Dishwasher E2 error myself?

Yes, you can check and clear the drainage path and inspect the drain filter and hose for blockages.

How much does it cost to fix E2 error?

Repair costs for the E2 error typically range from $50 to $250, depending on the model and service region.

When should I call a technician for E2?

Call a technician if basic troubleshooting does not resolve the error or if the drain pump appears faulty.

Data last verified: 2026-04-23

User Comments (0)

Share your experience or solution below.

Be the first to comment!