Sub Zero Refrigerator Error 10-F-00

⚡ Quick Answer: The Sub Zero Refrigerator error code 10-F-00 indicates a malfunction in the evaporator fan, primarily due to an open or faulty refrigerator cabinet th... ✅ DIY Fixable

What Does Error 10-F-00 Mean?

The Sub Zero Refrigerator error code 10-F-00 indicates a malfunction in the evaporator fan, primarily due to an open or faulty refrigerator cabinet thermistor or its circuit. This error often results in improper temperature regulation, unusual noises, and inconsistent internal temperatures that could jeopardize food safety.

Common Symptoms:

  • Error code displayed in diagnostic mode or on control panel
  • Refrigerator temperature not being regulated correctly
  • Possible high or inconsistent internal temperature

Possible Causes

  • Open or faulty refrigerator cabinet thermistor or its circuit (medium)

How to Fix Error 10-F-00

DIY Fix Basic checks & reset

  1. Ensure the refrigerator doors are fully closed and not left ajar.
  2. Clean condenser coils to improve cooling performance.
  3. Power cycle the refrigerator: turn it off via control panel or breaker for ~30 seconds, then turn back on.

Technician Only Thermistor circuit diagnostic and repair

  1. Enter diagnostic mode and verify code with service manual procedure.
  2. Check thermistor resistance and wiring continuity for the refrigerator cabinet thermistor.
  3. Repair wiring or replace the thermistor sensor if readings are out of specification.
  4. Clear stored error codes after repair and validate normal operation.

Parts needed: Refrigerator cabinet thermistor sensor, Connector harness

🛑 When to Call a Pro:
  • If the error returns immediately after reset and basic maintenance.
  • If internal temperatures are consistently out of range and food safety is at risk.
  • If diagnostic checks find intermittent or unclear sensor readings.

Next step

Choose the next step for 10-F-00

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

Thermistor

Measures precise temperature changes and sends resistance feedback to the control board.

Typical part-only price
$15 - $35
DIY difficulty
Easy
Estimated time
15-30 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage 25W
component Evaporator Fan Motor
resistance 10-15 ohms
part_number Sub Zero 7001000
voltage_rating 120V AC

Common Questions

What does 10-F-00 error mean on Sub Zero Refrigerator?

It indicates a malfunction in the evaporator fan due to a faulty cabinet thermistor or its circuit.

Can I fix Sub Zero Refrigerator 10-F-00 error myself?

Yes, you can try basic checks like ensuring doors are closed and power cycling the refrigerator.

How much does it cost to fix 10-F-00 error?

Repair costs typically range from ¥8,000 to ¥30,000, including parts and technician labor.

When should I call a technician for 10-F-00?

Call a technician if the error persists after a reset or if internal temperatures remain unsafe for food.

Sources & References

Data last verified: 2026-04-23

User Comments (0)

Share your experience or solution below.

Be the first to comment!