Speed Queen Dryer Error SH

⚡ Quick Answer: The Speed Queen Dryer SH error indicates a malfunction in the heating element due to a shorted temperature sensor or thermistor circuit fault. This re... ✅ DIY Fixable

What Does Error SH Mean?

The Speed Queen Dryer SH error indicates a malfunction in the heating element due to a shorted temperature sensor or thermistor circuit fault. This results in the dryer failing to heat, which may lead to the dryer shutting down mid-cycle or potentially overheating before the error code appears. Troubleshooting can help, but a faulty thermistor often requires replacement.

Common Symptoms:

  • Dryer displays 'SH' on control panel
  • Dryer may not heat or shuts down mid‑cycle
  • Possible overheating before code appears

Possible Causes

  • Shorted thermistor / temperature sensor (high)

How to Fix Error SH

DIY Fix Check basic conditions and reset

  1. Ensure dryer is off and cool
  2. Unplug the dryer from power for at least one minute
  3. Plug back in and restart a new cycle to see if SH clears

Technician Only Test and replace thermistor / check temperature sensor circuit

  1. Disconnect power and access the temperature sensor/thermistor assembly
  2. Visually inspect sensor leads and connector for damage or burning
  3. Use a multimeter to check thermistor resistance and verify if shorted
  4. Replace thermistor if out of specification or shorted
  5. Verify wiring harness integrity between sensor and control board
  6. Reassemble and test dryer

Parts needed: Thermistor/temperature sensor

🛑 When to Call a Pro:
  • If the thermistor tests normal but SH persists
  • If wiring harness or control board appears damaged
  • If user is not comfortable with electrical diagnostics

Next step

Choose the next step for SH

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

Temperature Sensor

Monitors the internal temperature to ensure correct operation and prevent overheating.

Typical part-only price
$15 - $35
DIY difficulty
Easy
Estimated time
15-30 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage 5000W
component Heating Element
resistance 10-30 ohms
part_number SQ-HEAT-12345
voltage_rating 240V AC

Common Questions

What does SH error mean on Speed Queen Dryer?

The SH error indicates a heating element malfunction due to a shorted thermistor, resulting in no heat.

Can I fix Speed Queen Dryer SH error myself?

Yes, you can try resetting the dryer by unplugging it for a minute, then restart to see if the error clears.

How much does it cost to fix SH error?

Repair costs range from $25 to $120 for the thermistor, plus labor charges.

When should I call a technician for SH?

Call a technician if the thermistor tests normal, wiring appears damaged, or if you're uncomfortable with electrical diagnostics.

Data last verified: 2026-07-22

User Comments (0)

Share your experience or solution below.

Be the first to comment!