Speed Queen Dryer Error E01

⚡ Quick Answer: The Speed Queen Dryer error E01 signifies a communication issue between the dryer and its external infrared control device, such as a micro-wand. This... ✅ DIY Fixable

What Does Error E01 Mean?

The Speed Queen Dryer error E01 signifies a communication issue between the dryer and its external infrared control device, such as a micro-wand. This malfunction prevents the dryer from starting or responding to commands, often manifesting as the E01 code displayed on the control panel. Common causes include misalignment of the infrared communicator or blockages in the communication path. Ensuring proper alignment and removing obstructions can typically resolve the issue.

Common Symptoms:

  • Dryer displays E01 on the control panel when attempting to start or during use
  • Cycle does not proceed due to communication fault
  • External control device may be poorly aligned

Possible Causes

  • Misaligned or improperly aimed external infrared communicator causing communication fault (medium)
  • Obstructed or damaged infrared communication path (medium)

How to Fix Error E01

DIY Fix Check and realign external control device communication

  1. Ensure the external device is properly aimed directly at the dryer’s IR communication window.
  2. Remove any obstructions between the external device and the dryer’s communicator.
  3. Retry starting the dryer after proper alignment.

Technician Only Inspect infrared communication components

  1. Disconnect power to the dryer.
  2. Check the infrared communication receiver on the dryer for damage, debris, or misalignment.
  3. Inspect wiring harnesses related to the IR system.
  4. Test communication signals with appropriate diagnostic tools.
  5. Replace damaged IR sensors or related components if necessary.

Parts needed: Infrared receiver/sensor, Micro‑wand or external communication device components, Associated wiring harnesses

🛑 When to Call a Pro:
  • If E01 persists after verifying alignment and checking for obstructions.
  • If diagnostic inspection shows damaged IR communication hardware.

Next step

Choose the next step for E01

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Diagnostic aid

Optional aid — no replacement part was confirmed

Digital Multimeter

Essential tool for diagnosing electrical continuity, voltage, and resistance problems.

No purchase link is shown because the diagnosis is not specific enough to recommend a product.

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage 5000W
component Control Board
resistance N/A
part_number SQ-123456
voltage_rating 240V AC

Common Questions

What does E01 error mean on Speed Queen Dryer?

E01 indicates a communication error between the dryer and its infrared control device, preventing operation.

Can I fix Speed Queen Dryer E01 error myself?

Yes, you can realign the external control device and remove any obstructions to resolve the E01 error.

How much does it cost to fix E01 error?

Repair costs for the E01 error typically range from $50 to $300, depending on parts and labor.

When should I call a technician for E01?

Call a technician if the E01 error persists after checking alignment or if hardware damage is suspected.

Sources & References

Data last verified: 2026-07-22

User Comments (0)

Share your experience or solution below.

Be the first to comment!