Speed Queen Dryer Error ESH
⚡ Quick Answer: The Speed Queen Dryer ESH error indicates a malfunction in the heating element due to a dead short in the temperature sensing circuit, often caused by... ✅ DIY Fixable
What Does Error ESH Mean?
The Speed Queen Dryer ESH error indicates a malfunction in the heating element due to a dead short in the temperature sensing circuit, often caused by a shorted temperature sensor or damaged wiring. This error leads to the dryer failing to produce heat, disrupting drying cycles until the issue is resolved.
Common Symptoms:
- Dryer stops with error code ESH displayed
- Dryer is unable to complete drying cycles due to temperature sensor fault
- Persistent error until component or wiring issue is addressed
Possible Causes
- Shorted temperature sensing circuit (thermistor or temperature sensor) (medium)
How to Fix Error ESH
DIY Fix Check for loose connections or obvious wiring damage
- Turn off and unplug the dryer from power.
- Visually inspect accessible wiring harnesses connected to the temperature sensor for pinch points, breaks, or loose plugs.
- Ensure all connectors are firmly seated.
Technician Only Test and replace the temperature sensor or wiring harness
- Disconnect power and access the dryer’s internal temperature sensor (thermistor) and associated wiring.
- Use a multimeter to test the sensor for shorts or out‑of‑spec resistance values.
- Inspect wiring harness continuity and repair or replace damaged wires.
- Replace the temperature sensor with a genuine Speed Queen part if testing indicates a short.
Parts needed: Temperature sensor (thermistor), Wiring harness/connectors
- If visual inspection does not reveal obvious wiring issues but error persists
- If you are uncomfortable accessing internal components or performing electrical testing
- If the error reoccurs after replacing the sensor
Next step
Choose the next step for ESH
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Dryer parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dryer Vent Cleaning Kit
Helps remove routine lint buildup from an accessible dryer vent path. It does not diagnose or repair an E-code or failed component.
Lint Trap Cleaning Brush
A narrow brush for routine cleaning around an accessible lint screen and housing.
Dryer Vent Hose Kit
A replacement exhaust duct option for visibly crushed or damaged external venting. Check diameter, length, local code, and installation clearance.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does ESH error mean on Speed Queen Dryer?
ESH error means there's a fault in the temperature sensing circuit, causing the dryer to stop and not produce heat.
Can I fix Speed Queen Dryer ESH error myself?
Yes, check for loose connections or visible wiring damage. Ensure all connectors are firmly seated.
How much does it cost to fix ESH error?
Repair costs range from $50 to $150 for parts, plus labor.
When should I call a technician for ESH?
Call a technician if the error persists after checking wiring or if you're uncomfortable with electrical testing.
Sources & References
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!