Speed Queen Dryer Error EOP

⚡ Quick Answer: The Speed Queen Dryer EOP error indicates a communication failure between the control board and the temperature sensor circuit. This often results in ... ✅ DIY Fixable

What Does Error EOP Mean?

The Speed Queen Dryer EOP error indicates a communication failure between the control board and the temperature sensor circuit. This often results in the dryer stopping mid-cycle, erratic display behavior, and potential heating issues due to an open temperature sensor circuit. Common causes include a malfunctioning thermistor or wiring harness issues, which can prevent the dryer from operating properly.

Common Symptoms:

  • Dryer stops mid‑cycle and displays EOP
  • Heating may not occur due to sensor issue
  • Display blinks or shows error immediately on start

Possible Causes

  • Open temperature sensor circuit (thermistor open) (medium)
  • Wiring harness issue to temperature sensor (medium)

How to Fix Error EOP

DIY Fix Verify lint and airflow around sensor

  1. Turn off and unplug dryer
  2. Remove lint build‑up around the temperature sensor area
  3. Ensure vents and filters are clean to improve airflow

Technician Only Check and test thermistor and wiring

  1. Disconnect power and locate the temperature sensor/thermistor
  2. Use a multimeter to check continuity of the sensor
  3. Inspect wiring harness and connectors for breaks or corrosion
  4. Replace defective sensor or wiring as needed

Parts needed: Temperature sensor (thermistor), Wiring harness/connectors

🛑 When to Call a Pro:
  • If error persists after cleaning vents and checking wiring
  • If continuity test shows sensor failure or wiring damage requiring part replacement

Technical Specifications

wattage 5000W
component Control Board
resistance 10-20 ohms
part_number SQ-123456
voltage_rating 240V AC

Common Questions

What does EOP error mean on Speed Queen Dryer?

EOP error indicates a communication failure, causing the dryer to stop mid-cycle or display erratic behavior.

Can I fix Speed Queen Dryer EOP error myself?

Yes, you can clean the lint around the sensor and check airflow to potentially resolve the issue.

How much does it cost to fix EOP error?

Repair costs range from $20–$100 for parts, plus labor.

When should I call a technician for EOP?

Call a technician if the error persists after cleaning or if tests indicate sensor or wiring damage.

Data last verified: 2026-03-13

User Comments (0)

Share your experience or solution below.

Be the first to comment!