Speed Queen Dryer Error E16
⚡ Quick Answer: The Speed Queen Dryer E16 error indicates a gas ignition failure in gas models, preventing the burner from igniting and producing heat. The dryer may ... ✅ DIY Fixable
What Does Error E16 Mean?
The Speed Queen Dryer E16 error indicates a gas ignition failure in gas models, preventing the burner from igniting and producing heat. The dryer may still run, but without heat, drying clothes effectively is impossible. This issue can arise from several causes, including igniter failure, a weak or faulty gas valve coil, a malfunctioning flame sensor, or problems with the gas supply. Immediate troubleshooting is essential to identify the specific cause and ensure safe operation.
Common Symptoms:
- Dryer displays E16 on control panel
- Dryer may run but fails to ignite gas burner/produce heat
- Occurs on gas dryers only
Possible Causes
- Igniter failure (medium)
- Gas valve coil weakness or failure (medium)
- Faulty flame sensor (medium)
- Gas supply issue (shutoff, low pressure) (medium)
How to Fix Error E16
DIY Fix Check gas supply and basic ignition conditions
- Ensure dryer is off and cool before inspection
- Confirm the gas shutoff valve to the dryer is fully open
- Verify that other gas appliances in the house are functioning normally
- Restart a drying cycle to see if code reoccurs
Technician Only Test and replace ignition components
- Disconnect power and gas to the dryer
- Access burner assembly and observe ignition sequence
- Test igniter for continuity and replace if open
- If igniter glows but no flame, test gas valve coils and replace if weak or failed
- Clean or test flame sensor and replace if defective
Parts needed: Igniter, Gas valve coils, Flame sensor
- If gas smell is detected
- If user is not comfortable working with gas components
- If error persists after basic checks
Next step
Choose the next step for E16
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Gas Valve
Controls the flow of natural gas or propane to the burner jets.
- Typical part-only price
- $60 - $140
- DIY difficulty
- Hard
- Estimated time
- 45-60 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Flame Sensor
Confirms burner flame or radiant heat so the appliance can control gas flow safely.
Model-compatible Dryer parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dryer Vent Cleaning Kit
Helps remove routine lint buildup from an accessible dryer vent path. It does not diagnose or repair an E-code or failed component.
Lint Trap Cleaning Brush
A narrow brush for routine cleaning around an accessible lint screen and housing.
Dryer Vent Hose Kit
A replacement exhaust duct option for visibly crushed or damaged external venting. Check diameter, length, local code, and installation clearance.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 5000W |
|---|---|
| component | Heating Element |
| resistance | 10-30 ohms |
| part_number | SQ-HEAT-001 |
| voltage_rating | 240V AC |
Common Questions
What does E16 error mean on Speed Queen Dryer?
E16 indicates a gas ignition failure, preventing heat production while the dryer runs.
Can I fix Speed Queen Dryer E16 error myself?
Yes, check the gas supply and ensure the gas shutoff valve is fully open.
How much does it cost to fix E16 error?
Repair costs typically range from $100 to $350 depending on the necessary parts.
When should I call a technician for E16?
Call a technician if you smell gas, are uncomfortable handling gas components, or if the error persists.
Sources & References
- Speed Queen Manuals & Downloads (official)
Data last verified: 2026-07-20
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!