Speed Queen Dryer Error E00
⚡ Quick Answer: The Speed Queen Dryer error E00 indicates a communication issue with the control board, often preventing the dryer from starting or responding to comm... ✅ DIY Fixable
What Does Error E00 Mean?
The Speed Queen Dryer error E00 indicates a communication issue with the control board, often preventing the dryer from starting or responding to commands. This error typically arises from alignment problems with external devices, such as the micro-wand used in commercial units, affecting the infrared communication. Ensuring proper positioning can resolve the issue.
Common Symptoms:
- Display shows E00 on control panel during startup or cycle
- Dryer may not start or initialize normally when this code appears
- Typically associated with external device communication interruptions
Possible Causes
- Communication/IR alignment issue between external device and control (medium)
How to Fix Error E00
DIY Fix Re‑align External Communication Device
- Ensure the dryer is powered on and the display shows the E00 code
- Check any external communication device for proper positioning and aiming toward the dryer’s IR communicator
- Re‑aim or reposition the device so that the infrared communicator aligns correctly
- Attempt to clear the error and restart the dryer
DIY Fix Power Cycle the Dryer
- Turn off the dryer or unplug it from power
- Wait at least 30 seconds
- Reconnect power and turn the dryer back on
- Check to see whether the error code persists
Technician Only Inspect IR Communication and Replace Faulty Components
- Disconnect power and inspect the IR communication components for damage or improper installation
- Check wiring harnesses and connectors for continuity and secure connections
- Replace failed communication sensors or control interface components as needed
- Reassemble and test the dryer to confirm resolution
Parts needed: Infrared communication assembly, Associated wiring harnesses, Control interface board (if damaged)
- If re‑aiming and power cycling do not clear the E00 code
- If the communication/IR sensor appears physically damaged
- If other error codes appear concurrently suggesting deeper control issues
Next step
Choose the next step for E00
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
- Typical part-only price
- $20 - $120
- DIY difficulty
- Medium
- Estimated time
- 30-90 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Dryer parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dryer Vent Cleaning Kit
Helps remove routine lint buildup from an accessible dryer vent path. It does not diagnose or repair an E-code or failed component.
Lint Trap Cleaning Brush
A narrow brush for routine cleaning around an accessible lint screen and housing.
Dryer Vent Hose Kit
A replacement exhaust duct option for visibly crushed or damaged external venting. Check diameter, length, local code, and installation clearance.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does E00 error mean on Speed Queen Dryer?
E00 indicates a malfunction in the control board due to communication issues.
Can I fix Speed Queen Dryer E00 error myself?
Yes, you can realign the external device or power cycle the dryer to attempt a fix.
How much does it cost to fix E00 error?
Repair costs range from $50 to $300+, depending on parts and labor.
When should I call a technician for E00?
Call a technician if re-aiming and power cycling don't work or if you see other error codes.
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!