Solt Range Hood Error E9
⚡ Quick Answer: The E9 error code on your Solt Rangehood indicates a potential malfunction in the motor, which may be characterized by unusual noises or a complete fa... ✅ DIY Fixable
What Does Error E9 Mean?
The E9 error code on your Solt Rangehood indicates a potential malfunction in the motor, which may be characterized by unusual noises or a complete failure to operate. To address this issue, it's essential to perform a basic inspection of the unit, checking for any blocked filters or obstructions in the ducting. A power reset may help restore functionality. If the error persists, professional diagnosis may be required to identify faulty components such as the control board or wiring harness.
Possible Causes
- Motor Assembly
How to Fix Error E9
DIY Fix Check rangehood and consult support
- Turn off and unplug the rangehood.
- Inspect the unit for obvious issues like blocked filters or obstructions in ducting.
- Confirm that power is restored and attempt to restart the unit after a short wait.
- If the error persists, contact Solt/Residentia support with model and error code details.
Technician Only Professional diagnosis
- Use appropriate diagnostic tools to check control board inputs and outputs.
- Inspect wiring, sensors, and motor circuits for faults.
- Verify if filters and ducting meet installation standards and are not blocked.
- Clear error codes if supported by service interface, then test rangehood function.
Parts needed: Control board, Sensors (if applicable), Wiring harness
- If the error E9 remains after basic checks and power reset.
- If unusual sounds, smells, or smoke accompany the error.
Next step
Choose the next step for E9
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
- Typical part-only price
- $120 - $280
- DIY difficulty
- Medium
- Estimated time
- 20-40 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Range Hood parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Technical Specifications
| wattage | 150W |
|---|---|
| component | Motor Assembly |
| resistance | 5-15 ohms |
| part_number | SRH-MOTOR-001 |
| voltage_rating | 120V AC |
Common Questions
What does E9 error mean on Solt Rangehood?
E9 indicates a motor malfunction in the rangehood, often with unusual noises or failure to operate.
Can I fix Solt Rangehood E9 error myself?
Yes, you can perform basic checks like inspecting for blockages and doing a power reset.
How much does it cost to fix E9 error?
Repair costs vary by region, typically including technician call-out and diagnostics.
When should I call a technician for E9?
Call a technician if the error persists after basic checks or if you notice unusual sounds, smells, or smoke.
Sources & References
- Sôlt Knowledge Base (general support page) (official)
Data last verified: 2026-07-26
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!