Solt Range Hood Error E1

⚡ Quick Answer: The Solt Rangehood E1 error code typically signifies a malfunction in the fan motor. Users may notice the E1 code displayed on the control panel, ofte... ⚠️ Difficulty Varies

What Does Error E1 Mean?

The Solt Rangehood E1 error code typically signifies a malfunction in the fan motor. Users may notice the E1 code displayed on the control panel, often accompanied by unusual noises or a complete failure to operate. It's advisable to check the user manual for troubleshooting steps, ensure proper installation, and confirm that filters are clean. A general reset by disconnecting the power supply may help clear the error, although further investigation may be needed if the code persists.

Common Symptoms:

  • User reports E1 displayed on rangehood control panel (reported but not defined in manuals) — no official symptom description available

Possible Causes

  • Fan Motor
  • Control Board
  • Wiring Issues

How to Fix Error E1

DIY Fix Check user manual troubleshooting section and basic operation

  1. Consult your specific Solt rangehood model’s user manual for any troubleshooting steps listed (many manuals include generic issues like fan not running) — user manuals are available for different Solt rangehood models but do *not* explicitly list an E1 code.
  2. Ensure the rangehood is correctly installed and the filters are clean
  3. Turn off and disconnect the power supply, wait a few minutes, then reconnect and restart to see if the E1 code clears
  4. If error persists, contact Solt/Residentia support using contact details in the manual

Technician Only Contact Solt/Residentia authorised service

  1. Use the model number and serial information from the rating plate as referenced in the manual when contacting support.
  2. Have technician check internal control board and sensors if error is associated with an internal fault.
  3. Technician to review wiring, control panel electronics and replace defective components as applicable.

Parts needed: Control board, Internal wiring harness, Sensors or switches as relevant

🛑 When to Call a Pro:
  • If the E1 code persists after basic reset and cleaning
  • If any unusual noises, burning smells, or visible electrical faults occur

Next step

Choose the next step for E1

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Check during diagnosis

Most relevant component to inspect

Main Control Board

The central brain of the appliance that controls all components, cycles, and timings.

Typical part-only price
$120 - $280
DIY difficulty
Medium
Estimated time
20-40 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other parts options

Check related components first; use model search as a fallback.

Possible related component

Wiring Harness

Connects controls, sensors, motors, and other electrical components inside the appliance.

$20 - $120 · Medium · 30-90 mins

Check fit & price
Model number required

Model-compatible Range Hood parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage 150W
component Fan Motor
resistance 5-15 ohms
part_number SRH-FM2023
voltage_rating 120V AC

Common Questions

What does E1 error mean on Solt Rangehood?

E1 indicates a fan motor malfunction, often linked to unusual noises or failure to operate.

Can I fix Solt Rangehood E1 error myself?

Yes, check the user manual, ensure proper installation, clean filters, and try a power reset.

How much does it cost to fix E1 error?

Repair costs vary based on the fault and technician rates; diagnostic fees may apply.

When should I call a technician for E1?

Call a technician if the E1 code persists after a reset, or if you notice unusual noises or smells.

Data last verified: 2026-07-26

User Comments (0)

Share your experience or solution below.

Be the first to comment!