Solt Range Hood Error E10
⚡ Quick Answer: The Solt Rangehood E10 error code indicates a malfunction in the fan motor, which may cause it to make unusual noises or fail to operate entirely. To ... ✅ DIY Fixable
What Does Error E10 Mean?
The Solt Rangehood E10 error code indicates a malfunction in the fan motor, which may cause it to make unusual noises or fail to operate entirely. To troubleshoot, ensure the rangehood is receiving power and is properly installed. Reset the unit by turning it off at the circuit breaker or power switch. If the issue persists, consult a technician for further diagnosis and repair.
Possible Causes
- Fan Motor
How to Fix Error E10
DIY Fix Check rangehood basic function and connections
- Ensure the rangehood has power and is properly installed.
- Turn off and then on at the circuit breaker or power switch.
- Check that the control panel buttons or touch controls respond.
- Inspect visible wiring and connections for looseness or damage if accessible without disassembly.
Technician Only Consult Solt service manual or support
- Obtain the exact model’s official service manual for detailed troubleshooting.
- Use diagnostic tools to read internal error reports.
- Check electronic control board and sensors specific to that rangehood model.
- Replace any failed parts per official procedure.
Parts needed: Control board, Sensors (if applicable), Wiring harnesses
- If the error persists despite basic checks
- If there is any sign of electrical damage or burning smell
- If the unit does not respond to reset attempts
Next step
Choose the next step for E10
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
- Typical part-only price
- $120 - $280
- DIY difficulty
- Medium
- Estimated time
- 20-40 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Range Hood parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Technical Specifications
| wattage | 80W |
|---|---|
| component | Fan Motor |
| resistance | 10-20 ohms |
| part_number | SRH-FM2023 |
| voltage_rating | 120V AC |
Common Questions
What does E10 error mean on Solt Rangehood?
E10 error indicates a malfunction in the fan motor, often resulting in unusual noises or failure to operate.
Can I fix Solt Rangehood E10 error myself?
Yes, you can check power connections, reset the unit, and ensure proper installation.
How much does it cost to fix E10 error?
Repair costs vary widely depending on the specific part failure and your region.
When should I call a technician for E10?
Call a technician if the error persists after basic checks or if you notice electrical damage.
Sources & References
- Sôlt Knowledge Base – Residentia Support (official)
Data last verified: 2026-07-26
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!