Solt Microwave Error E10

⚡ Quick Answer: The Solt Microwave error code E10 indicates a potential issue with the magnetron, which is responsible for heating food. Users may notice unusual buzz... ✅ DIY Fixable

What Does Error E10 Mean?

The Solt Microwave error code E10 indicates a potential issue with the magnetron, which is responsible for heating food. Users may notice unusual buzzing sounds and the microwave's failure to heat. To troubleshoot, start by unplugging the microwave for 5-10 minutes and then restart it. Ensure the door is correctly closed and latched. If the error persists, it is advisable to consult a professional technician for further inspection.

Possible Causes

  • Magnetron
  • High Voltage Capacitor
  • Control Board

How to Fix Error E10

DIY Fix Basic checks upon E10 display

  1. Remove power (unplug) for at least 5–10 minutes and then restart to see if the code clears.
  2. Ensure the microwave’s door is properly closed and latched before operation.
  3. Try powering from a stable outlet (avoid extension cords) to ensure adequate voltage.

Technician Only Professional inspection recommended

  1. Since no Solt‑specific documentation was found, a qualified technician should inspect the unit’s control and door interlock circuits.
  2. Diagnostic tools should be used to check for internal faults (e.g., control PCB, sensors).
🛑 When to Call a Pro:
  • If error persists after basic reset attempts.
  • If the microwave will not start, the display repeatedly shows E10, or the door latch feels misaligned.

Next step

Choose the next step for E10

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Check during diagnosis

Most relevant component to inspect

Capacitor

Stores electrical energy to assist in starting or running the motor efficiently.

Typical part-only price
$15 - $35
DIY difficulty
Easy
Estimated time
10-20 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other parts options

Check related components first; use model search as a fallback.

Possible related component

Microwave Magnetron

Generates microwave energy for heating food and requires high-voltage service procedures.

$80 - $220 · Hard · 60-120 mins

Check fit & price
Model number required

Model-compatible Microwave parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage 1000W
component Magnetron
resistance 0.5-1.5 ohms
part_number SM-MAG1234
voltage_rating 120V AC

Common Questions

What does E10 error mean on Solt Microwave?

E10 indicates a potential magnetron malfunction, often with buzzing sounds and heating issues.

Can I fix Solt Microwave E10 error myself?

Yes, try unplugging for 5-10 minutes and ensure the door is properly closed.

How much does it cost to fix E10 error?

Repair costs vary by model and region, consult a technician for an accurate estimate.

When should I call a technician for E10?

Call a technician if the error persists or the microwave won't start after basic resets.

Sources & References

Data last verified: 2026-07-22

User Comments (0)

Share your experience or solution below.

Be the first to comment!