Solt Microwave Error E01
⚡ Quick Answer: The Solt Microwave error E01 typically indicates a malfunction in the magnetron, leading to issues such as no heat during operation and unusual buzzin... ⚠️ Difficulty Varies
What Does Error E01 Mean?
The Solt Microwave error E01 typically indicates a malfunction in the magnetron, leading to issues such as no heat during operation and unusual buzzing sounds. If you encounter this error, it is advisable to inspect the door interlock and switches, as these components may affect microwave functionality. If the error persists after basic troubleshooting, professional assistance is recommended.
Possible Causes
- Magnetron
- High Voltage Capacitor
- Control Board
How to Fix Error E01
DIY Fix Check basic microwave function and safety
- Ensure the microwave is unplugged and remains disconnected from power before inspecting anything.
- Check that the door closes firmly and that nothing is obstructing the door latch.
- Power cycle the microwave by unplugging for at least 60 seconds, then reconnect and test if the error persists.
Technician Only Inspect door interlock and switches
- With power disconnected, remove the microwave outer cover only if trained and qualified.
- Inspect the door interlock switches and latch assemblies for misalignment, broken actuators, or wear.
- Test door switches for continuity when the door is closed; replace any that do not function correctly.
Parts needed: door interlock microswitches, door latch assembly
- If the error persists after a basic power cycle and door/latch inspection.
- If the door interlock or internal safety circuits are suspected to be faulty — these involve high‑voltage circuits and should be serviced by a qualified technician.
Next step
Choose the next step for E01
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Door Latch Assembly
Mechanically secures the appliance door and may operate a door-closed safety switch.
- Typical part-only price
- $15 - $80
- DIY difficulty
- Medium
- Estimated time
- 20-60 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Microwave parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Technical Specifications
| wattage | 1000W |
|---|---|
| component | Magnetron |
| resistance | 0.5-1.5 ohms |
| part_number | SM-MG-1234 |
| voltage_rating | 120V AC |
Common Questions
What does E01 error mean on Solt Microwave?
E01 indicates a potential magnetron malfunction, resulting in no heat and unusual buzzing sounds.
Can I fix Solt Microwave E01 error myself?
Yes, you can check the door latch and power cycle the microwave, but professional help is recommended for serious issues.
How much does it cost to fix E01 error?
Repair costs can vary, but typically involve modest parts; professional service is advised.
When should I call a technician for E01?
Call a technician if the error persists after basic troubleshooting or if door interlock issues are suspected.
Sources & References
Data last verified: 2026-07-22
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!