Smeg Washing Machine Error F16
⚡ Quick Answer: The Smeg Washing Machine error F16 indicates a failure in the door lock mechanism, which may prevent the door from locking properly and cause the mach... ✅ DIY Fixable
What Does Error F16 Mean?
The Smeg Washing Machine error F16 indicates a failure in the door lock mechanism, which may prevent the door from locking properly and cause the machine to fail to start. To address this issue, ensure that the door is fully closed and latched before starting a cycle. If the problem persists, consider performing a basic reset by turning off and unplugging the machine for five minutes before powering it back on.
Possible Causes
- Door Lock Assembly
How to Fix Error F16
DIY Fix Basic troubleshooting
- Turn off and unplug the machine, wait 5 minutes, and power it back on to see if the code clears.
- Ensure the door is fully closed and latched before attempting a cycle.
- Check the load and redistribute laundry evenly to avoid imbalance issues (common trigger in some washers).
Technician Only Professional diagnosis
- Connect diagnostic tool or service software (if available) to read internal fault codes for your specific Smeg model.
- Inspect door lock assembly and its sensor circuits.
- Refer to model‑specific service manual or contact Smeg support with exact model number and error F16.
Parts needed: Diagnostic interface, Door lock / latch assembly, Control board (if internal fault)
- If the error persists after basic resets and troubleshooting.
- If the machine shows additional faults.
Next step
Choose the next step for F16
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Door Lock Assembly
Secures the door shut during operation for safety and signals the control board to run.
- Typical part-only price
- $30 - $75
- DIY difficulty
- Easy
- Estimated time
- 10-20 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Door Latch Assembly
Mechanically secures the appliance door and may operate a door-closed safety switch.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does F16 error mean on Smeg Washing Machine?
F16 error signifies a door lock mechanism failure, preventing the machine from starting.
Can I fix Smeg Washing Machine F16 error myself?
Yes, check if the door is fully closed and try resetting the machine by unplugging it for five minutes.
How much does it cost to fix F16 error?
Repair costs vary widely; professional service may be needed for diagnosis and parts replacement.
When should I call a technician for F16?
Call a technician if the error persists after troubleshooting or if you notice additional faults.
Sources & References
- Codici di errore Lavatrici Smeg – general list (community)
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!