Smeg Washing Machine Error F05

⚡ Quick Answer: The Smeg Washing Machine error F05 indicates a drainage issue, typically involving the drain pump. This error prevents the machine from properly drain... ✅ DIY Fixable

What Does Error F05 Mean?

The Smeg Washing Machine error F05 indicates a drainage issue, typically involving the drain pump. This error prevents the machine from properly draining water, causing the washing cycle to halt. Common symptoms include the error code F05 displayed on the control panel and the presence of standing water inside the drum. To resolve this, start by checking the drain hose for blockages and cleaning the drain pump filter if accessible.

Common Symptoms:

  • Error code F05 displayed on the control panel
  • Washing cycle halts and machine may not drain

Possible Causes

  • Drain Pump
  • Blocked Drain Filter
  • Faulty Wiring

How to Fix Error F05

DIY Fix Check basic drain system

  1. Turn off and unplug the washing machine.
  2. Check the drain hose for kinks, bends, or obvious blockages.
  3. Inspect and clean the drain pump filter if accessible.
  4. Ensure the machine is on a level surface and retry operation.

Technician Only Professional diagnostic for internal sensors and drain components

  1. Check the drain pump operation and continuity.
  2. Inspect pressure/air‑pressure switch and associated tubing for clogs or disconnections.
  3. Verify water level sensor and related wiring for faults.

Parts needed: Drain pump, Pressure switch / air tube, Water level sensor

🛑 When to Call a Pro:
  • If the error persists after basic drain checks
  • If there is standing water inside the machine
  • If you are unsure how to safely access internal components

Next step

Choose the next step for F05

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

Drain Pump

Pumps waste water out of the appliance during the drain cycle.

Typical part-only price
$35 - $80
DIY difficulty
Easy
Estimated time
15-30 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Also check
RepairClinic

Other components that may be involved

Check these only if your diagnosis points to them.

Possible related component

Pressure Switch

Detects the water level inside the tub and signals when to start or stop filling.

$25 - $65 · Easy · 15-30 mins

Check fit & price

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage 100W
component Drain Pump
resistance 30-50 ohms
part_number Smeg 210000123
voltage_rating 230V AC

Common Questions

What does F05 error mean on Smeg Washing Machine?

F05 indicates a problem with the drainage system, typically involving the drain pump.

Can I fix Smeg Washing Machine F05 error myself?

Yes, check the drain hose for kinks and clean the drain pump filter.

How much does it cost to fix F05 error?

Repair costs vary depending on parts and labor, typically including technician visit and parts.

When should I call a technician for F05?

Call a technician if the error persists after checking the drain system or if there's standing water.

Sources & References

Data last verified: 2026-07-22

User Comments (0)

Share your experience or solution below.

Be the first to comment!