Smeg Washing Machine Error F14

⚡ Quick Answer: The Smeg Washing Machine error F14 indicates a malfunction in the door lock mechanism. This may prevent the door from locking properly, which can hind... ✅ DIY Fixable

What Does Error F14 Mean?

The Smeg Washing Machine error F14 indicates a malfunction in the door lock mechanism. This may prevent the door from locking properly, which can hinder the machine from starting or completing any wash cycle. It is essential to check that the door is fully closed and latched, and ensure that the water supply valves are open to avoid further complications.

Possible Causes

  • Door Lock Mechanism

How to Fix Error F14

DIY Fix Check basic machine status

  1. Turn the washer off and unplug it.
  2. Check that the door is fully closed and latched.
  3. Ensure the water supply valves are open.
  4. Inspect hoses for kinks or obstructions.
  5. Plug it back in and restart a basic cycle.

Technician Only Service diagnostics

  1. Consult official Smeg service manuals for your exact model.
  2. Use professional diagnostic tools to read internal fault memory.
  3. Inspect sensors, wiring, and control board connections.

Parts needed: Diagnostic interface, Sensors and wiring

🛑 When to Call a Pro:
  • If the F14 error persists after basic power cycling.
  • If the machine does not complete any cycle or shows other faults.
  • If there are signs of electrical or water leakage issues.

Next step

Choose the next step for F14

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Check during diagnosis

Most relevant component to inspect

Door Lock Assembly

Secures the door shut during operation for safety and signals the control board to run.

Typical part-only price
$30 - $75
DIY difficulty
Easy
Estimated time
10-20 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage N/A
component Door Lock Mechanism
resistance N/A
part_number Smeg 210020123
voltage_rating 230V AC

Common Questions

What does F14 error mean on Smeg Washing Machine?

F14 indicates a malfunction in the door lock mechanism, preventing the machine from starting.

Can I fix Smeg Washing Machine F14 error myself?

Yes, check that the door is fully closed and latched, and ensure the water supply valves are open.

How much does it cost to fix F14 error?

Repair costs vary by region and service provider, depending on the necessary diagnostics and parts.

When should I call a technician for F14?

Call a technician if the F14 error persists after basic checks, or if you notice other faults or leaks.

Sources & References

Data last verified: 2026-07-20

User Comments (0)

Share your experience or solution below.

Be the first to comment!