Smeg Washing Machine Error F11

⚡ Quick Answer: The Smeg Washing Machine error code F11 signifies a drainage problem, which may be accompanied by a loud buzzing sound and a drain error message on th... ✅ DIY Fixable

What Does Error F11 Mean?

The Smeg Washing Machine error code F11 signifies a drainage problem, which may be accompanied by a loud buzzing sound and a drain error message on the display. This issue typically arises due to a blocked or kinked drain hose, or if the machine is overloaded. Ensuring the door is fully closed and performing a reset by unplugging the machine can help resolve transient faults.

Possible Causes

  • Blocked drain filter
  • Faulty drain pump
  • Kinked drain hose

How to Fix Error F11

DIY Fix General troubleshooting

  1. Turn off and unplug the washing machine, wait a few minutes, then plug it back in — sometimes resets transient faults.
  2. Ensure the washing machine door is fully closed and latched correctly.
  3. Check for obvious issues such as overload, blocked drain hose, or kinked inlet hoses.
🛑 When to Call a Pro:
  • If the error persists after basic checks and reset.
  • If unusual noises, leaks, or inability to drain are present.

Next step

Choose the next step for F11

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Check during diagnosis

Most relevant component to inspect

Drain Pump

Pumps waste water out of the appliance during the drain cycle.

Typical part-only price
$35 - $80
DIY difficulty
Easy
Estimated time
15-30 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Also check
RepairClinic

Other components that may be involved

Check these only if your diagnosis points to them.

Possible related component

Drain Hose

Carries waste water from the drain pump to your home's standpipe or sink drain.

$15 - $30 · Easy · 15-30 mins

Check fit & price

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage 100W
component Drain Pump
resistance 30-50 ohms
part_number Smeg 6100200001
voltage_rating 230V AC

Common Questions

What does F11 error mean on Smeg Washing Machine?

F11 indicates a drainage problem, often with a buzzing sound and a drain error message.

Can I fix Smeg Washing Machine F11 error myself?

Yes, you can reset the machine, check for blockages, and ensure the door is closed.

How much does it cost to fix F11 error?

Repair costs vary by model and region, so it's best to consult a local technician.

When should I call a technician for F11?

Call a technician if the error persists after checks or if you hear unusual noises or see leaks.

Sources & References

Data last verified: 2026-07-22

User Comments (0)

Share your experience or solution below.

Be the first to comment!