Smeg Washing Machine Error F10
⚡ Quick Answer: The Smeg Washing Machine error F10 indicates a malfunction with the drain pump, often leading to improper drainage and the activation of an error mess... ✅ DIY Fixable
What Does Error F10 Mean?
The Smeg Washing Machine error F10 indicates a malfunction with the drain pump, often leading to improper drainage and the activation of an error message. If your washing machine is failing to drain water effectively, it may be due to issues with the pump or related components. To troubleshoot, ensure the door is securely closed, check the water supply, and examine hoses for kinks or blockages.
Possible Causes
- Drain Pump
- Clogged Drain Filter
- Faulty Wiring
How to Fix Error F10
DIY Fix General preliminary checks
- Turn off the washing machine and unplug it for a few minutes, then plug it back in and restart the cycle.
- Ensure the door is properly closed and latched.
- Check that the water supply is turned on, hoses are not kinked, and inlet filters are clear.
- Inspect the drain hose and pump filter for obvious blockages.
Technician Only Professional diagnosis
- Use the service manual specific to the machine’s model number to interpret proprietary fault diagnostics.
- Connect a diagnostic tool or service interface to retrieve any stored fault codes beyond the simple display code.
- Inspect wiring, control board communication pathways, and sensor inputs that could correspond to an undefined fault signal.
Parts needed: control board, door lock assembly, sensors (water, temp, level)
- If the error persists after basic checks or the machine fails to start or complete cycles.
- If there are signs of water leakage, burning smell, or unusual noises.
Next step
Choose the next step for F10
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
- Typical part-only price
- $120 - $280
- DIY difficulty
- Medium
- Estimated time
- 20-40 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other components that may be involved
Check these only if your diagnosis points to them.
Door Lock Assembly
Secures the door shut during operation for safety and signals the control board to run.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Technical Specifications
| wattage | 100W |
|---|---|
| component | Drain Pump |
| resistance | 10-20 ohms |
| part_number | SMEGBLDRP001 |
| voltage_rating | 230V AC |
Common Questions
What does F10 error mean on Smeg Washing Machine?
F10 indicates a problem with the drain pump, causing drainage issues.
Can I fix Smeg Washing Machine F10 error myself?
Yes, you can perform preliminary checks such as ensuring the door is closed and checking hoses.
How much does it cost to fix F10 error?
Repair costs vary widely based on diagnosis and required parts.
When should I call a technician for F10?
Call a technician if the error persists after basic checks or if you notice unusual noises or smells.
Sources & References
Data last verified: 2026-07-22
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!