Smeg Washing Machine Error F07
⚡ Quick Answer: The Smeg Washing Machine error F07 indicates a malfunction in the door lock mechanism, which may prevent the machine from starting and could lead to t... ✅ DIY Fixable
What Does Error F07 Mean?
The Smeg Washing Machine error F07 indicates a malfunction in the door lock mechanism, which may prevent the machine from starting and could lead to the door remaining locked. Additionally, it may be associated with a drain failure, impacting the machine's ability to complete wash cycles. Addressing the door lock and ensuring proper drainage could resolve the issue.
Common Symptoms:
- Machine stops during or at the end of a wash cycle with F07 displayed
- Potential inability to drain within expected time
Possible Causes
- Door Lock Assembly
- Wiring Issues
- Control Board Malfunction
How to Fix Error F07
DIY Fix Basic checks (low confidence, generic)
- Turn off the machine and unplug it for safety.
- Check that the drain hose isn’t kinked, bent, or blocked with lint/debris.
- Clean the drain pump filter, if accessible.
- Ensure that the drain outlet isn’t clogged and that water can flow freely.
Technician Only Service diagnosis (low confidence)
- Connect diagnostic tools and check internal fault logs if available.
- Inspect drainage pump and associated wiring for continuity or mechanical blockage.
- Verify water level sensor and pressure switch signals.
- Check control board for faults if other causes are excluded.
Parts needed: Drain pump, Hoses and filters, Water level sensor / pressure switch, Control board
- If the error persists after basic user‑level checks
- If there is water leakage, unusual noises, or inability to drain despite hose and filter cleaning
- If the machine displays additional error codes or behaves erratically
Next step
Choose the next step for F07
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other components that may be involved
Check these only if your diagnosis points to them.
Pressure Switch
Detects the water level inside the tub and signals when to start or stop filling.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Technical Specifications
| wattage | N/A |
|---|---|
| component | Door Lock Assembly |
| resistance | 1-5 ohms |
| part_number | Smeg 210010012 |
| voltage_rating | 230V AC |
Common Questions
What does F07 error mean on Smeg Washing Machine?
The F07 error means there is a door lock malfunction, preventing the machine from starting.
Can I fix Smeg Washing Machine F07 error myself?
Yes, you can try basic checks like unplugging the machine, inspecting the drain hose, and cleaning the drain pump filter.
How much does it cost to fix F07 error?
Repair costs for the F07 error typically range from $100 to $300+, depending on parts and labor.
When should I call a technician for F07?
Call a technician if the error persists after basic checks, or if you notice leaks, unusual noises, or erratic behavior.
Data last verified: 2026-07-22
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!