Smeg Washing Machine Error E6

⚡ Quick Answer: The Smeg Washing Machine E6 error indicates a drainage failure, where the machine fails to pump out water within the expected time. This error typical... ✅ DIY Fixable

What Does Error E6 Mean?

The Smeg Washing Machine E6 error indicates a drainage failure, where the machine fails to pump out water within the expected time. This error typically occurs during or after the fill/wash cycle, resulting in water remaining in the tub and may be accompanied by unusual sounds and a flashing display. Common causes include a blocked drain pump filter or drain hose, or a faulty drain pump.

Common Symptoms:

  • Water remains in tub at time of error
  • Error appears during or after fill/wash cycle when draining expected
  • Pump filter or drain hose blockage detected

Possible Causes

  • Blocked or restricted drain pump filter or drain hose (medium)
  • Faulty or failed drain pump (medium)

How to Fix Error E6

DIY Fix Check and clean the drain filter and hose

  1. Unplug the washing machine from power.
  2. Open the bottom front access panel (if present) and locate the drain pump filter.
  3. Place towels and a shallow tray to catch water.
  4. Rotate the drain pump filter cap counter‑clockwise to remove and clean out debris (lint, coins, etc.).
  5. Check the drain hose for kinks or visible clogs and straighten/clear as needed.
  6. Reassemble and run a short drain/spin cycle to test.

Technician Only Inspect or replace the drain pump

  1. Disconnect all power and water to the machine.
  2. Remove the rear or bottom panel to access the drain pump assembly.
  3. Verify electrical continuity to the pump and inspect the impeller for free rotation.
  4. If impeller is seized or electrical tests fail, replace the drain pump.
  5. Reassemble, reconnect water and power, and verify proper draining operation.

Parts needed: Drain pump assembly, Pump filter cap/gasket if worn

🛑 When to Call a Pro:
  • If water leakage occurs from pump or hose connections
  • If pump humming but not spinning after filter/hose clearing
  • If error persists after cleaning drains and hoses

Technical Specifications

wattage 30W
component Drain Pump
resistance 10-20 ohms
part_number Smeg 610210108
voltage_rating 220V AC

Common Questions

What does E6 error mean on Smeg Washing Machine?

E6 error indicates a drainage failure, with water remaining in the tub and unusual sounds during spinning.

Can I fix Smeg Washing Machine E6 error myself?

Yes, you can check and clean the drain filter and hose to resolve the E6 error.

How much does it cost to fix E6 error?

The estimated repair cost for the E6 error ranges from $50 to $200, depending on parts and labor.

When should I call a technician for E6?

Call a technician if water leaks from the pump, the pump hums without spinning, or the error persists after cleaning.

Sources & References

Data last verified: 2026-03-09

User Comments (0)

Share your experience or solution below.

Be the first to comment!