Smeg Washing Machine Error E10

⚡ Quick Answer: The SMEG washing machine E10 error indicates a water inlet issue, commonly resulting in the machine failing to fill adequately at the start of a cycle... ✅ DIY Fixable

What Does Error E10 Mean?

The SMEG washing machine E10 error indicates a water inlet issue, commonly resulting in the machine failing to fill adequately at the start of a cycle. This error may stem from faults in the water level detection system, such as a blocked pressure switch or inlet valve problems. Users may notice this error at the beginning of a wash or during the spin phase if the required water level cannot be confirmed.

Common Symptoms:

  • Machine fails to fill with water at start of cycle
  • Error appears at start of wash or during spin/dry phase if water level cannot be confirmed
  • Some community listings associate E10 with motor over current in older code tables (likely different machine family)

Possible Causes

  • Water level/pressure detection fault (pressure switch or hose blockage) (medium)
  • Inadequate water fill / inlet issues (medium)

How to Fix Error E10

DIY Fix Check water supply and inlet components

  1. Ensure the water tap supplying the washing machine is fully open.
  2. Inspect inlet hoses for kinks, blockages or visible damage.
  3. Turn off the water supply and clean the inlet filter screens at the hose connection if accessible.
  4. Restart the machine after checking supply to see if the error clears.

Technician Only Inspect and test pressure switch and related plumbing

  1. Disconnect power and remove access panels to locate the pressure switch and hose from the tub.
  2. Check the pressure hose for blockages, kinks or splits; replace if compromised.
  3. Clean any sludge/detergent buildup in the pressure chamber.
  4. Test the pressure switch with a multimeter while simulating water level changes; replace if it does not respond correctly.

Parts needed: Pressure switch, Pressure hose, Inlet valve (if related water intake issues), Inlet hose/filter assembly

🛑 When to Call a Pro:
  • If error persists after water supply and pressure switch checks
  • If machine shows additional electrical faults, sparks, burning smells, or unusual noises
  • If internal components (valves, switches) test faulty during technician inspection

Technical Specifications

wattage 20W
component Water Inlet Valve
resistance 500-1500 ohms
part_number SMEG 210020000
voltage_rating 230V AC

Common Questions

What does E10 error mean on SMEG washing machine?

E10 indicates a water inlet issue, preventing the machine from filling with water.

Can I fix SMEG washing machine E10 error myself?

Yes, check the water supply, hoses for blockages, and clean inlet filters.

How much does it cost to fix E10 error?

Repair costs range from ¥5,000 to ¥20,000+, depending on the issue and location.

When should I call a technician for E10?

Call a technician if the error persists after checks or if there are additional electrical faults.

Data last verified: 2026-03-09

User Comments (0)

Share your experience or solution below.

Be the first to comment!