Smeg Oven Error F06

⚡ Quick Answer: The Smeg Oven error F06 indicates a malfunction in the grill/broil element circuit, typically resulting in the grill or broil function not heating. Th... ✅ DIY Fixable

What Does Error F06 Mean?

The Smeg Oven error F06 indicates a malfunction in the grill/broil element circuit, typically resulting in the grill or broil function not heating. This error may present with an F06 code on the display and unusual clicking sounds during operation. Common causes include a failed grill/broil heating element, damaged wiring in the circuit, or a fault in the control board's relay system.

Common Symptoms:

  • Display shows F06 when attempting to use grill/broil
  • Grill/broil element does not heat

Possible Causes

  • Open or failed grill/broil heating element (medium)
  • Damaged wiring or connection in the grill/broil circuit (medium)
  • Control board relay or driving circuit fault affecting the grill element (low)

How to Fix Error F06

DIY Fix Basic checks and reset

  1. Turn off the oven and disconnect power at the mains.
  2. Allow the oven to cool completely.
  3. Visually inspect the grill/broil element for obvious breaks or burn marks.
  4. Check that nothing is blocking or touching the grill element.

Technician Only Element circuit diagnosis and replacement

  1. Disconnect the oven from mains power.
  2. Remove access panels to the rear/top of the oven as needed to access the grill/broil element and wiring.
  3. Measure continuity of the grill/broil element with a multimeter; replace if open circuit.
  4. Inspect and repair/replace any damaged wiring or connectors in the grill circuit.
  5. If element and wiring are good but circuit still fails, test the control board relay driving the grill element and replace the control board if necessary.

Parts needed: Grill/Broil heating element, Control board (if relay or driver circuit fault), Wiring/connectors

🛑 When to Call a Pro:
  • If you are not comfortable opening and working inside the oven
  • If continuity checks are inconclusive and components beyond the element are suspected
  • If the oven displays multiple error codes or behaves unpredictably after basic checks

Technical Specifications

wattage 2000W
component Heating Element
resistance 10-30 ohms
part_number SMEG123456
voltage_rating 240V AC

Common Questions

What does F06 error mean on Smeg Oven?

F06 error means there's a malfunction in the grill/broil element circuit, preventing it from heating.

Can I fix Smeg Oven F06 error myself?

Yes, you can perform basic checks like inspecting the grill element and resetting the oven.

How much does it cost to fix F06 error?

Repair costs range from ¥8,000–¥35,000 for element and wiring, to ¥30,000–¥80,000+ for control board replacement.

When should I call a technician for F06?

Call a technician if you're uncomfortable with repairs, or if multiple error codes appear after basic checks.

Data last verified: 2026-03-09

User Comments (0)

Share your experience or solution below.

Be the first to comment!