Smeg Oven Error F01

⚡ Quick Answer: The Smeg Oven error F01 indicates a malfunction in the temperature sensor circuit, leading to erratic temperature readings or the oven failing to heat... ✅ DIY Fixable

What Does Error F01 Mean?

The Smeg Oven error F01 indicates a malfunction in the temperature sensor circuit, leading to erratic temperature readings or the oven failing to heat. This issue can arise from an open or short circuit in the temperature sensor or a disconnection in the wiring. Immediate symptoms include the error code appearing when starting the oven and a failure to heat regardless of the selected function.

Common Symptoms:

  • Display shows F01 when trying to start heating
  • Oven fails to heat
  • Error appears immediately after selecting a cooking function

Possible Causes

  • Temperature sensor (probe) open circuit / short circuit / disconnected (medium)
  • Loose or faulty wiring/connectors between temperature sensor and control board (medium)

How to Fix Error F01

DIY Fix Basic checks and reset

  1. Turn off the oven and disconnect from power for at least 10 minutes.
  2. Reconnect power and attempt to restart the oven.
  3. Observe whether F01 persists.

Technician Only Inspect and test the oven temperature sensor and wiring

  1. Power off at breaker and ensure oven is cool.
  2. Access the oven internal rear panel to locate the temperature sensor/probe.
  3. Check wiring harness and connector condition, ensuring secure seating at both sensor and control board.
  4. Measure sensor resistance with a multimeter to confirm open/short conditions; compare to expected values for the specific Smeg sensor.
  5. Replace sensor and/or repair wiring if readings are outside expected range or connection is faulty.

Parts needed: Oven temperature sensor/probe, Wiring harness/connectors

🛑 When to Call a Pro:
  • Error persists after sensor and wiring inspection and replacement
  • Any signs of electrical damage, burning smell, or intermittent power issues

Technical Specifications

wattage N/A
component Temperature Sensor
resistance 1000-2000 ohms
part_number Smeg 123456789
voltage_rating 230V AC

Common Questions

What does F01 error mean on Smeg Oven?

F01 indicates a malfunction in the temperature sensor circuit, affecting heating performance.

Can I fix Smeg Oven F01 error myself?

Yes, you can perform basic checks like resetting the oven and inspecting the temperature sensor.

How much does it cost to fix F01 error?

Repair costs range from $30 to $150 for the sensor part, plus any additional labor for wiring repairs.

When should I call a technician for F01?

Contact a technician if the error persists after inspection or if you notice electrical damage or burning smells.

Data last verified: 2026-03-09

User Comments (0)

Share your experience or solution below.

Be the first to comment!