Smeg Induction Hob Error ER29

⚡ Quick Answer: The Smeg Induction Hob error code ER29 typically indicates a malfunction in the induction coil. Users may notice unusual buzzing sounds and an unrespo... ✅ DIY Fixable

What Does Error ER29 Mean?

The Smeg Induction Hob error code ER29 typically indicates a malfunction in the induction coil. Users may notice unusual buzzing sounds and an unresponsive cooking zone display. This error may occur during various conditions, such as power on, use of the cooking zone, or overheating. If the issue persists, further investigation is necessary to identify the underlying problem.

Possible Causes

  • Induction Coil

How to Fix Error ER29

DIY Fix General checks and documentation search

  1. Refer to the specific user manual for your exact model; input model number on Smeg’s official manual download page to attempt to find an error code list.
  2. Note the exact conditions when ER29 appeared (during power on, cook zone use, overheating, cookware present, etc.)
  3. Power cycle the hob: turn off at the mains, wait a few minutes, then turn back on to see if the code clears.

Technician Only Contact Smeg Technical Support / Qualified Service

  1. Provide the exact model and the ER29 display to Smeg support.
  2. Request official error code definition for ER29 and recommended diagnostic steps.
  3. If instructed, perform supported diagnostics (e.g., voltage checks, sensor checks) per Smeg guidance.
🛑 When to Call a Pro:
  • When the error persists after power cycling and no documented meaning is available — professional diagnosis required.
  • If other symptoms such as non-heating, electrical smells, or repeated shutdowns appear concurrently.

Next step

Choose the next step for ER29

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Check during diagnosis

Most relevant component to inspect

Induction Heating Coil

Generates electromagnetic energy to heat pots and pans directly.

Typical part-only price
$80 - $180
DIY difficulty
Medium
Estimated time
30-60 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage 2000W
component Induction Coil
resistance 10-30 ohms
part_number SMEG-IC-12345
voltage_rating 230V AC

Common Questions

What does ER29 error mean on Smeg Induction Hob?

ER29 indicates a malfunction in the induction coil, often resulting in buzzing sounds and an unresponsive display.

Can I fix Smeg Induction Hob ER29 error myself?

Yes, try power cycling the hob and referring to the user manual for troubleshooting steps.

How much does it cost to fix ER29 error?

Repair costs vary based on model and region; consult a technician for an accurate estimate.

When should I call a technician for ER29?

Call a technician if the error persists after power cycling or if other symptoms like non-heating occur.

Sources & References

Data last verified: 2026-07-22

User Comments (0)

Share your experience or solution below.

Be the first to comment!